| Internet-Draft | ARN | July 2024 |
| Liu | Expires 5 January 2025 | [Page] |
This document focuses on the information carried in (Adaptive Routing Notification)ARN messages and how they are delivered into the network.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 5 January 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Adaptive routing is a technology that makes dynamic routing decisions based on changes in traffic load and network topology.Devices with adaptive routing capabilities can dynamically select the outport in the forwarding table based on the congestion condition of the outport or downstream link.¶
When congestion is detected and there's no alternate local outport available, an adaptive routing notification (ARN) message would be generated by the device and sent to the upstream node which is able performance adaptive routing, so the traffic can be removed from the original path based on ARN to relief the congestion.¶
The local adaptive routing mechanism on the device, e.g, how to determine congestion and locate the traffic that causes congestion, is implementation specific and out of the scope of the document.¶
This document focuses on the information carried in ARN messages and how they are delivered into the network, which involves the interaction between devices.¶
Generally, the ARN mechanism is more suitable for scenarios where bandwidth utilization in the network is uneven. For the packet-spray scenario, since the packets are evenly distributed on each equal-cost path, ARN may not be the most suitable mechanism in this case. But wether to deploy this function is implementation specific, and this document does not make any restrictions on the scenarios where the ARN mechanism can be used.¶
AR: Adaptive Routing¶
ARN: Adaptive Routing Notification¶
Flowlet: A flowlet is defined as a burst of packets from the same flow followed by an idle interval.¶
Traffic: The set of packets with the same traffic identifier and take the same forwarding path within a certain period of time, e.g, a flow/flowlet.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
On receiving the ARN message, the upstream node requires some necessary information to operate the path of the corresponding traffic, including traffic identifier(e.g, 5 tuples), the original outport of the traffic of the upstream node, and the ARN message triggering reason(e.g, congestion).¶
The traffic identifier is used to locate the corresponding forwarding table entry and the original outport is the port that needs to be blocked in the forwarding table.¶
In order to fulfill the above requirements, the following options are discussed in the following sub-sections.¶
After receiving a certain traffic, the node records the traffic identifier and the receiving port of the traffic. When congestion is detected due to this traffic, the ARN message is generated for it, the node SHOULD send the ARN message to its direct-connected upstream node via the original receiving port which is recorded locally. In other words, the ARN message is returned along the original forwarding path of the traffic.¶
After receiving the ARN, the direct-connected upstream node would treat the receiving port of the ARN message as the original outport of the traffic, so it can block this port from the forwarding table for this traffic to change the forwarding path. If there's no other outport which meets the forwarding requirement on the this node, it SHOULD continue to send the ARN message to its direct-connected upstream router following the same procedure as mentioned above, which means this node SHOULD record the traffic identifier and the receiving port as well after receiving the traffic.¶
Figure 1 shows a three-tier clos topology. The port on S7 that connects to S4 is P7-4, port on S4 that connects to S2 is P4-2, and so on.¶
+-----+ +-----+ +-----+
+-------------| |--------| |--------| |-------------+
| | S3 |-----+ | S1 | +-----| S5 | |
| +-----| | +-|--| |--|-+ | |-----+ |
| | +-----+ | | +-----+ | | +-----+ | |
| | | | | | | |
| | +-----+ | | +-----+ | | +-----+ | |
| +-----------| |---+ | | | | +---| |-----------+ |
| | | | S4 | +--| S2 |--+ | S6 | | | |
| | | +---| |--------| |--------| |---+ | | |
| | | | +-----+ +-----+ +-----+ | | | |
| | | | | | | |
+-----+ +-----+ +-----+ +-----+
| | | | | | | |
| S7 | | S8 | | S9 | | S10 |
+-----+ +-----+ +-----+ +-----+
| | | | | | | |
O O O O O O O O
Servers Servers
Taking per-flow load-balancing as an example, at a certain time, for flow1, the forwarding path in the network is S7-S4-S2-S6-S10. After receiving flow1, S6 records the 5 tuples and the inport(i.e, P6-2) of it, and then S6 forwards flow1 to SW10 via P6-10. When congestion occurs on P6-10 due to flow1, S6 decides to change the forwarding path for it, but there is no other local port to S10 on S6, so S6 generates an ARN carrying the identifier of flow1 and sends it to S2 along the original forwarding path via P6-2. After S2 receives the ARN message from P2-6, S2 would block P2-6 from the forwarding table for flow1 and use P2-5 for forwarding. If P2-5 does not meet the forwarding requirements, S2 will generate an ARN for flow1 and send it to S4 via P2-4.¶
Overall, all the forwarding nodes except the headend node along the path MAY record its receiving port of the corresponding traffic in case there's no alternate path for the traffic locally and the ARN message needs to be sent to the upstream node along the original path until there's an upstream node can perform adaptive routing locally.¶
To fulfill the requirement, all the routers along the forwarding path of the traffic need to record the receiving port of the corresponding traffic. This method of storing traffic information locally on the node consumes additional local resources, especially when the amount of traffic that requires adaptive routing is not small.¶
Instead of store the traffic forwarding information locally, another option is to embed the information into the packet.¶
After receiving the traffic, if there is more than one outport that meets the forwarding requirements(e.g, not congested), the node first choose an outport for traffic forwarding, then it embeds it's own device identifier and the outport identifier into the packets of the traffic. The device identifier is the global identifier of the device in the network, a routable loopback address on the device is RECOMMENDED. The outport identifier is a local identifier that uniquely identifies a port on the this device.¶
If there're already device identifier and outport identifier in the packet, the node SHOULD replace them with its own information, which insures that any node along the path can obtain the information of its nearest upstream node that can perform adaptive routing for the packet, as well as the outport through which the packet was originally forwarded at the this upstream node.¶
Once the congestion is detected by a node due to certain traffic, the node obtains identifiers from the packet belonging to the traffic to generate and send the ARN message. The outport identifier SHOULD be carried in the ARN along with the traffic identifier. And the ARN is sent directly to the device indicated by the device identifier in the original packet.¶
After receiving the ARN message carrying the node's own device identifier, e.g, the destination address is a local address on the node, the node would block the outport identified by the outport identifier in the ARN for the forwarding table of the corresponding traffic located by the traffic identifier.¶
Regardless of the method used, the implementation of ARN comes at a cost, requiring the devices to consume additional resources. In many cases, enabling the ARN mechanism for all traffic in the network is not the best solution. For example, when congestion occurs, rerouting mice flows has little effect on alleviating congestion compared with elephant flows. In addition, for some detection/telemetry messages, their purpose is to detect the quality of the traffic path and/or find the blocking point. Therefore, the original path needs to be maintained and should not be changed even if there is congestion.¶
An ARN TAG is introduced in this document to control the enabling of ARN mechanism per traffic. This tag is carried in the data packet to indicate that adaptive routing is required for the traffic to which this tagged packet belongs. The specific field carrying the Tag in the packet is out of scope.¶
For option 1, the nodes only record the traffic identifier and receiving port of the tagged packet.¶
For option 2, only after receiving a tagged packet, the nodes will check whether there's more than one outport for the packet and put the device identifier and outport identifier into it.¶
This document has no IANA actions.¶
TBA¶