Remote ATtestation ProcedureS H. Birkholz Internet-Draft Fraunhofer SIT Intended status: Standards Track T. Fossati Expires: 9 January 2025 Linaro Y. Deshpande arm N. Smith Intel W. Pan Huawei Technologies 8 July 2024 Concise Reference Integrity Manifest draft-ietf-rats-corim-05 Abstract Remote Attestation Procedures (RATS) enable Relying Parties to assess the trustworthiness of a remote Attester and therefore to decide whether to engage in secure interactions with it - or not. Evidence about trustworthiness can be rather complex and it is deemed unrealistic that every Relying Party is capable of the appraisal of Evidence. Therefore that burden is typically offloaded to a Verifier. In order to conduct Evidence appraisal, a Verifier requires not only fresh Evidence from an Attester, but also trusted Endorsements and Reference Values from Endorsers and Reference Value Providers, such as manufacturers, distributors, or device owners. This document specifies the information elements for representing Endorsements and Reference Values in CBOR format. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 9 January 2025. Birkholz, et al. Expires 9 January 2025 [Page 1] Internet-Draft CoRIM July 2024 Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1. Terminology and Requirements Language . . . . . . . . . . 6 2. Verifier Reconciliation . . . . . . . . . . . . . . . . . . . 6 2.1. Internal Representation . . . . . . . . . . . . . . . . . 7 2.2. Interacting with an ACS . . . . . . . . . . . . . . . . . 8 2.3. Quantizing Inputs . . . . . . . . . . . . . . . . . . . . 9 3. Typographical Conventions for CDDL . . . . . . . . . . . . . 9 4. Concise Reference Integrity Manifest (CoRIM) . . . . . . . . 10 4.1. CoRIM Map . . . . . . . . . . . . . . . . . . . . . . . . 11 4.1.1. Identity . . . . . . . . . . . . . . . . . . . . . . 12 4.1.2. Tags . . . . . . . . . . . . . . . . . . . . . . . . 13 4.1.3. Locator Map . . . . . . . . . . . . . . . . . . . . . 13 4.1.4. Profile Types . . . . . . . . . . . . . . . . . . . . 13 4.1.5. Entities . . . . . . . . . . . . . . . . . . . . . . 14 4.2. Signed CoRIM . . . . . . . . . . . . . . . . . . . . . . 14 4.2.1. Protected Header Map . . . . . . . . . . . . . . . . 15 4.2.2. Meta Map . . . . . . . . . . . . . . . . . . . . . . 16 4.2.2.1. Signer Map . . . . . . . . . . . . . . . . . . . 16 4.2.3. Unprotected CoRIM Header Map . . . . . . . . . . . . 16 5. Concise Module Identifier (CoMID) . . . . . . . . . . . . . . 16 5.1. Structure . . . . . . . . . . . . . . . . . . . . . . . . 18 5.1.1. Tag Identity . . . . . . . . . . . . . . . . . . . . 18 5.1.1.1. Tag ID . . . . . . . . . . . . . . . . . . . . . 19 5.1.1.2. Tag Version . . . . . . . . . . . . . . . . . . . 19 5.1.2. Entities . . . . . . . . . . . . . . . . . . . . . . 19 5.1.3. Linked Tag . . . . . . . . . . . . . . . . . . . . . 20 5.1.4. Triples . . . . . . . . . . . . . . . . . . . . . . . 21 5.1.4.1. Environments . . . . . . . . . . . . . . . . . . 22 5.1.4.1.1. Environment Class . . . . . . . . . . . . . . 23 5.1.4.1.2. Environment Instance . . . . . . . . . . . . 23 5.1.4.1.3. Environment Group . . . . . . . . . . . . . 24 5.1.4.1.4. Measurements . . . . . . . . . . . . . . . . 24 Birkholz, et al. Expires 9 January 2025 [Page 2] Internet-Draft CoRIM July 2024 5.1.4.1.4.1. Measurement Keys . . . . . . . . . . . . 25 5.1.4.1.4.2. Measurement Values . . . . . . . . . . . 25 5.1.4.1.4.3. Version . . . . . . . . . . . . . . . . . 27 5.1.4.1.4.4. Security Version Number . . . . . . . . . 28 5.1.4.1.4.5. Flags . . . . . . . . . . . . . . . . . . 29 5.1.4.1.4.6. Raw Values Types . . . . . . . . . . . . 30 5.1.4.1.4.7. Address Types . . . . . . . . . . . . . . 30 5.1.4.1.5. Crypto Keys . . . . . . . . . . . . . . . . . 31 5.1.4.1.6. Integrity Registers . . . . . . . . . . . . . 32 5.1.4.1.7. Domain Types . . . . . . . . . . . . . . . . 33 5.1.4.2. Reference Values Triple . . . . . . . . . . . . . 33 5.1.4.3. Endorsed Values Triple . . . . . . . . . . . . . 33 5.1.4.4. Device Identity Triple . . . . . . . . . . . . . 34 5.1.4.5. Attest Key Triple . . . . . . . . . . . . . . . . 34 5.1.4.6. Domain Dependency Triple . . . . . . . . . . . . 35 5.1.4.7. Domain Membership Triple . . . . . . . . . . . . 35 5.1.4.8. CoMID-CoSWID Linking Triple . . . . . . . . . . . 36 5.1.4.9. Conditional Endorsement Series Triple . . . . . . 36 5.1.4.10. Conditional Endorsement Triple . . . . . . . . . 37 5.2. Extensibility . . . . . . . . . . . . . . . . . . . . . . 38 5.2.1. Map Extensions . . . . . . . . . . . . . . . . . . . 38 5.2.2. Data Type Extensions . . . . . . . . . . . . . . . . 38 6. CoBOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 6.1. Structure . . . . . . . . . . . . . . . . . . . . . . . . 39 7. Common Types . . . . . . . . . . . . . . . . . . . . . . . . 40 7.1. Non-Empty . . . . . . . . . . . . . . . . . . . . . . . . 40 7.2. Entity . . . . . . . . . . . . . . . . . . . . . . . . . 40 7.3. Validity . . . . . . . . . . . . . . . . . . . . . . . . 41 7.4. UUID . . . . . . . . . . . . . . . . . . . . . . . . . . 41 7.5. UEID . . . . . . . . . . . . . . . . . . . . . . . . . . 42 7.6. OID . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 7.7. Digest . . . . . . . . . . . . . . . . . . . . . . . . . 42 7.8. Tagged Bytes Type . . . . . . . . . . . . . . . . . . . . 42 8. Appraisal of CoRIM-based Inputs . . . . . . . . . . . . . . . 43 8.1. Appraisal Procedure . . . . . . . . . . . . . . . . . . . 43 8.2. Verifier Abstraction . . . . . . . . . . . . . . . . . . 44 8.2.1. Internal Representation of Conceptual Messages . . . 46 8.2.1.1. Internal Representation of Evidence . . . . . . . 47 8.2.1.2. Internal Representation of Reference Values . . . 48 8.2.1.3. Internal Representation of Endorsed Values . . . 48 8.2.1.4. Internal Representation of Policy Statements . . 49 8.2.1.5. Internal Representation of Attestation Results . 50 8.2.2. Internal Representation of ACS . . . . . . . . . . . 50 8.2.3. Internal Representation of Attestation Results Set (ARS) . . . . . . . . . . . . . . . . . . . . . . . . 50 8.3. Input Validation and Transformationn (Phase 1) . . . . . 51 8.3.1. Input Validation . . . . . . . . . . . . . . . . . . 51 8.3.1.1. CoRIM Selection . . . . . . . . . . . . . . . . . 51 Birkholz, et al. Expires 9 January 2025 [Page 3] Internet-Draft CoRIM July 2024 8.3.1.2. Tags Extraction and Validation . . . . . . . . . 51 8.3.1.3. CoBOM Extraction . . . . . . . . . . . . . . . . 52 8.3.2. Evidence Collection . . . . . . . . . . . . . . . . . 52 8.3.2.1. Cryptographic Validation of Evidence . . . . . . 52 8.3.3. Input Transformation . . . . . . . . . . . . . . . . 53 8.3.3.1. Appraisal Context Construction . . . . . . . . . 54 8.3.3.2. Reference and Endorsed Values Tranformation . . . 54 8.3.3.3. Evidence Tranformation . . . . . . . . . . . . . 54 8.4. Evidence Augmentation (Phase 2) . . . . . . . . . . . . . 54 8.4.1. Appraisal Claims Set Initialization . . . . . . . . . 54 8.4.1.1. The authorized-by field in Appraisal Claims Set . . . . . . . . . . . . . . . . . . . . . . . . 55 8.4.1.2. Appraisal Claims Set augmentation using CoMID triples . . . . . . . . . . . . . . . . . . . . . . 55 8.4.1.3. Ordering of triple processing . . . . . . . . . . 56 8.5. Reference Values Corroboration and Augmentation (Phase 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 8.6. Endorsed Values Augmentation (Phase 4) . . . . . . . . . 56 8.6.1. Processing triples representing Conditional Endorsements . . . . . . . . . . . . . . . . . . . . 57 8.6.1.1. Processing Conditional Endorsement Triple . . . . 57 8.6.1.2. Processing Conditional Endorsement Series Triple . . . . . . . . . . . . . . . . . . . . . . 57 8.6.1.3. Processing a stateful environment against the Appraisal Claims Set . . . . . . . . . . . . . . . 57 8.7. Verifier Augmentation (Phase 5) . . . . . . . . . . . . . 58 8.8. Policy Augmentation (Phase 6) . . . . . . . . . . . . . . 58 8.9. Attestation Results Production and Transformationn (Phase 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 8.10. Adding to the Appraisal Claims Set . . . . . . . . . . . 59 8.10.1. Appraisal Claims Set Requirements . . . . . . . . . 59 8.10.2. ACS Augmentation . . . . . . . . . . . . . . . . . . 60 8.11. ECT Comparison . . . . . . . . . . . . . . . . . . . . . 60 8.11.1. Environment Comparison . . . . . . . . . . . . . . . 60 8.11.2. Claims Comparison . . . . . . . . . . . . . . . . . 60 8.11.2.1. Comparison of measurement-values-map . . . . . . 61 8.11.2.1.1. Comparison for svn entries . . . . . . . . . 61 8.11.2.1.2. Comparison for digests entries . . . . . . . 62 8.11.2.1.3. Comparison for raw-value entries . . . . . . 62 8.11.2.1.4. Comparison for cryptokeys entries . . . . . 63 8.11.2.1.5. Comparison for Integrity Registers . . . . . 63 8.11.3. Authority Comparison . . . . . . . . . . . . . . . . 63 8.11.4. Name Space Comparison . . . . . . . . . . . . . . . 63 8.11.5. Conceptual Message Type Comparison . . . . . . . . . 63 8.11.6. Profile-directed Comparison . . . . . . . . . . . . 64 9. Implementation Status . . . . . . . . . . . . . . . . . . . . 64 9.1. Veraison . . . . . . . . . . . . . . . . . . . . . . . . 64 10. Security and Privacy Considerations . . . . . . . . . . . . . 65 Birkholz, et al. Expires 9 January 2025 [Page 4] Internet-Draft CoRIM July 2024 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 65 11.1. New COSE Header Parameters . . . . . . . . . . . . . . . 65 11.2. New CBOR Tags . . . . . . . . . . . . . . . . . . . . . 66 11.3. New CoRIM Registries . . . . . . . . . . . . . . . . . . 67 11.4. New CoMID Registries . . . . . . . . . . . . . . . . . . 67 11.5. New CoBOM Registries . . . . . . . . . . . . . . . . . . 67 11.6. New Media Types . . . . . . . . . . . . . . . . . . . . 67 11.6.1. corim-signed+cbor . . . . . . . . . . . . . . . . . 68 11.6.2. corim-unsigned+cbor . . . . . . . . . . . . . . . . 68 11.7. CoAP Content-Formats Registration . . . . . . . . . . . 69 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 69 12.1. Normative References . . . . . . . . . . . . . . . . . . 69 12.2. Informative References . . . . . . . . . . . . . . . . . 71 Appendix A. Base CoRIM CDDL . . . . . . . . . . . . . . . . . . 73 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 86 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 87 1. Introduction In order to conduct Evidence appraisal, a Verifier requires not only fresh Evidence from an Attester, but also trusted Endorsements (e.g., test results or certification data) and Reference Values (e.g., the version or digest of a firmware component) associated with the Attester. Endorsements and Reference Values are obtained from relevant supply chain actors, such as manufacturers, distributors, or device owners. In a complex supply chain, multiple actors will likely produce these values over several points in time. As such, one supply chain actor will only provide the subset of characteristics that they know about the Attester. A proper subset is typical because a certain supply chain actor will be the responsible authority for only a system component/module that is measured amongst a long chain of measurements. Attesters vary across vendors and even across products from a single vendor. Not only Attesters can evolve and therefore new measurement types need to be expressed, but an Endorser may also want to provide new security relevant attributes about an Attester at a future point in time. This document specifies Concise Reference Integrity Manifests (CoRIM) - a CBOR [STD94] based data model addressing the above challenges by using an extensible format common to all supply chain actors and Verifiers. CoRIM enables Verifiers to reconcile a complex distributed supply chain into a single homogeneous view. See Section 2. Birkholz, et al. Expires 9 January 2025 [Page 5] Internet-Draft CoRIM July 2024 1.1. Terminology and Requirements Language This document uses terms and concepts defined by the RATS architecture. For a complete glossary see Section 4 of [RFC9334]. In this document, the term CoRIM message and CoRIM documents are used as synonyms. A CoRIM data structure can be at rest (e.g., residing in a file system as a document) or can be in flight (e.g., conveyed as a message in a protocol exchange). The bytes composing the CoRIM data structure are the same either way. The terminology from CBOR [STD94], CDDL [RFC8610] and COSE [STD96] applies; in particular, CBOR diagnostic notation is defined in Section 8 of [STD94] and Appendix G of [RFC8610]. Terms and concepts are always referenced as proper nouns, i.e., with Capital Letters. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Verifier Reconciliation This specification describes the CoRIM format and documents how a Verifier should process the CoRIM to enable CoRIM authors to convey their intended meaning. A Verifier needs to reconcile its various inputs, with CoRIM being one of them. In addition to the external CoRIM documents, the Verifier is expected to create an internal representation for each input and map each external representation to an internal one. By using the internal representation, the Verifier processes inputs as if they are part of a conversation, keeping track of who said what. The origin of the inputs is tracked as _authority_. The authority for the Claims in a CoRIM is the CoRIM issuer. Birkholz, et al. Expires 9 January 2025 [Page 6] Internet-Draft CoRIM July 2024 Effectively, Attesters, Reference Value Providers, Endorsers, Verifier Owners, Relying Parties, and even the Verifier potentially all contribute to the conversation. Each producer of corresponding RATS Conceptual Messages can assert Claims about an Attester's actual or allowed state. The Verifier's objective is to produce a list of Claims that describe the Attester's presumed actual state. Producers of RATS Conceptual Messages can assert contradictory assertions. For example, a compromised Attester may produce false claims that conflict with the Reference Values provided by a Reference Value Provider (RVP). In essence, if Evidence is not corroborated by an RVP's Claims, then the RVP's Claims are not included in the internal representation of an Attester's actual state, a.k.a., Appraisal Claims Set (ACS). A Verifier relies on input from appraisal policy to identify relevant assertions included in the ACS. For example, if a policy requires corroborated assertions issued by a particular RVP, then those assertions may be conveyed as Attestation Results. The Verifier may produce new assertions as a result of an applied appraisal policy. For example, if an appraisal procedure finds all of the components of a subsystem are configured correctly, the policy may direct the Verifier to produce new assertions, "Subsystem=X" has the Claim "TRUSTED=TRUE". Consequently, the internal ACS structure is a reconciled conversation between several producers of RATS Conceptual Messages that has mapped each message into a consistent internal representation, has associated the identity of the corresponding RATS role with each assertion (the authority), and has applied Conceptual Message constraints to the assertion. The CoRIM data model specified in this document covers the RATS Conceptual Message types, "Reference Values" and "Endorsements". Reference values and Endorsements are required for Verifier reconciliation, and Evidence is required for corresponding internal ACS creation as illustrated in Section 2.2. 2.1. Internal Representation In this document CDDL is used to specify both the CoRIM structure and to specify an internal representation for use in the appraisal procedure. The actual internal representation of a Verifier is implementation-specific and out-of-scope of this document. Requirements for an internal representation of Conceptual Messages are defined in Table 1, where each Conceptual Message type has a structure as depicted by the _Structure_ column. The internal representations used by this document are defined in Section 8.2.1. Birkholz, et al. Expires 9 January 2025 [Page 7] Internet-Draft CoRIM July 2024 2.2. Interacting with an ACS Conceptual Messages interact with an ACS by specifying criteria that should be met by the ACS and by presenting the assertions that should be added to the ACS if the criteria are satisfied. Internal representations of Conceptual Messages, ACS, and Attestation Results Set (ARS) should satisfy the following requirements for Verifier reconciliation and appraisal processing: +==============+====================+==============================+ | CM Type | Structure | Description | +==============+====================+==============================+ | Evidence | List of Evidence | If the Attester is | | | claims | authenticated, add Evidence | | | | claims to the ACS with | | | | Attester authority | +--------------+--------------------+------------------------------+ | Reference | List of Reference | If a reference value in a | | Values | Values claims | CoRIM matches claims in the | | | | ACS, then the authority of | | | | the CoRIM issuer is added to | | | | those claims. | +--------------+--------------------+------------------------------+ | Endorsements | List of expected | If the list of expected | | | actual state | claims are in the ACS, then | | | claims, List of | add the list of Endorsed | | | Endorsed Values | Values claims to the ACS | | | claims | with Endorser authority | +--------------+--------------------+------------------------------+ | Series | List of expected | If the expected claims are | | Endorsements | actual state | in the ACS, and if the | | | claims and a | series selection condition | | | series of | is satisfied, then add the | | | selection-addition | additional claims to the ACS | | | tuples | with Endorser authority. | | | | See Section 8.2.1.3 | +--------------+--------------------+------------------------------+ | Verifier | List of expected | If the list of expected | | | actual state | claims are in the ACS, then | | | claims, List of | add the list of Verifier- | | | Verifier-generated | generated claims to the ACS | | | claims | with Verifier authority | +--------------+--------------------+------------------------------+ | Policy | List of expected | If the list of expected | | | actual state | claims are in the ACS, then | | | claims, List of | add the list of Policy- | | | Policy-generated | generated claims to the ACS | | | claims | with Policy Owner authority | Birkholz, et al. Expires 9 January 2025 [Page 8] Internet-Draft CoRIM July 2024 +--------------+--------------------+------------------------------+ | Attestation | List of expected | If the list of expected | | Results | actual state | claims are in the ACS, then | | | claims, List of | copy the list of Attestation | | | expected | Results claims into the ARS. | | | Attestation | See Section 8.2.3 | | | Results claims | | +--------------+--------------------+------------------------------+ Table 1: Conceptual Message Representation Requirements 2.3. Quantizing Inputs // Tracked at: https://github.com/ietf-rats-wg/draft-ietf-rats-corim/ issues/242 3. Typographical Conventions for CDDL The CDDL definitions in this document follow the naming conventions illustrated in Table 2. Birkholz, et al. Expires 9 January 2025 [Page 9] Internet-Draft CoRIM July 2024 +========================+===============+==========================+ | Type trait | Example | Typographical convention | +========================+===============+==========================+ | extensible | int / text / | $NAME-type-choice | | type choice | ... | | +------------------------+---------------+--------------------------+ | closed type | int / text | NAME-type-choice | | choice | | | +------------------------+---------------+--------------------------+ | group | ( 1 => int // | $$NAME-group-choice | | choice | 2 => text ) | | +------------------------+---------------+--------------------------+ | group | ( 1 => int, 2 | NAME-group | | | => text ) | | +------------------------+---------------+--------------------------+ | type | int | NAME-type | +------------------------+---------------+--------------------------+ | tagged type | #6.123(int) | tagged-NAME-type | +------------------------+---------------+--------------------------+ | map | { 1 => int, 2 | NAME-map | | | => text } | | +------------------------+---------------+--------------------------+ | flags | &( a: 1, b: 2 | NAME-flags | | | ) | | +------------------------+---------------+--------------------------+ Table 2: Type Traits & Typographical Conventions 4. Concise Reference Integrity Manifest (CoRIM) A CoRIM is a collection of tags and related metadata in a concise CBOR [STD94] encoding. A CoRIM can be digitally signed with a COSE [STD96] signature. A tag identifies and describes properties of modules or components of a system. Tags can be of different types: * Concise Module ID (CoMID) tags (Section 5) contain metadata and claims about the hardware and firmware modules. * Concise Software ID (CoSWID) tags [RFC9393] describe software components. * Concise Bill of Material (CoBOM) tags (Section 6) contain the list of CoMID and CoSWID tags that the Verifier should consider as "active" at a certain point in time. Birkholz, et al. Expires 9 January 2025 [Page 10] Internet-Draft CoRIM July 2024 The set of tags is extensible so that future specifications can add new kinds of information. For example, Concise Trust Anchor Stores (CoTS) [I-D.ietf-rats-concise-ta-stores] is currently being defined as a standard CoRIM extension. Each CoRIM contains a unique identifier to distinguish a CoRIM from other CoRIMs. // Tracked at: https://github.com/ietf-rats-wg/draft-ietf-rats-corim/ issues/73 CoRIM can also carry the following optional metadata: * A locator, which allows discovery of possibly related RIMs * A profile identifier, which is used to interpret the information contained in the enclosed tags. A profile allows the base CoRIM CDDL definition to be customized to fit a specific Attester by augmenting the base CDDL data definition via the specified extension points or by constraining types defined. A profile MUST NOT change the base CoRIM CDDL definition's semantics, which includes not changing or overloading names and numbers registered at IANA registries used by this document. For more detail, see Section 4.1.4, * A validity period, which indicates the time period for which the CoRIM contents are valid. * Information about the supply chain entities responsible for the contents of the CoRIM and their associated roles. A CoRIM can be signed (Section 4.2) using COSE Sign1 to provide end- to-end security to the CoRIM contents. When CoRIM is signed, the protected header carries further identifying information about the CoRIM signer. Alternatively, CoRIM can be encoded as a CBOR-tagged payload (Section 4.1) and transported over a secure channel. The following CDDL describes the top-level CoRIM. corim = tagged-concise-rim-type-choice $concise-rim-type-choice /= tagged-corim-map $concise-rim-type-choice /= tagged-signed-corim 4.1. CoRIM Map The CDDL specification for the corim-map is as follows and this rule and its constraints must be followed when creating or validating a CoRIM map. Birkholz, et al. Expires 9 January 2025 [Page 11] Internet-Draft CoRIM July 2024 corim-map = { &(id: 0) => $corim-id-type-choice &(tags: 1) => [ + $concise-tag-type-choice ] ? &(dependent-rims: 2) => [ + corim-locator-map ] ? &(profile: 3) => $profile-type-choice ? &(rim-validity: 4) => validity-map ? &(entities: 5) => [ + corim-entity-map ] * $$corim-map-extension } The following describes each child item of this map. * id (index 0): A globally unique identifier to identify a CoRIM. Described in Section 4.1.1 * tags (index 1): An array of one or more CoMID or CoSWID tags. Described in Section 4.1.2 * dependent-rims (index 2): One or more services supplying additional, possibly dependent, manifests or related files. Described in Section 4.1.3 * profile (index 3): An optional profile identifier for the tags contained in this CoRIM. The profile MUST be understood by the CoRIM processor. Failure to recognize the profile identifier MUST result in the rejection of the entire CoRIM. If missing, the profile defaults to DICE. Described in Section 4.1.4 * rim-validity (index 4): Specifies the validity period of the CoRIM. Described in Section 7.3 * entities (index 5): A list of entities involved in a CoRIM life- cycle. Described in Section 4.1.5 * $$corim-map-extension: This CDDL socket is used to add new information structures to the corim-map. See Section 11.3. tagged-corim-map = #6.501(corim-map) 4.1.1. Identity A CoRIM Identifier uniquely identifies a CoRIM instance. The base schema allows UUID and text identifiers. Other types of identifiers could be defined as needed. $corim-id-type-choice /= tstr $corim-id-type-choice /= uuid-type Birkholz, et al. Expires 9 January 2025 [Page 12] Internet-Draft CoRIM July 2024 4.1.2. Tags A $concise-tag-type-choice is a tagged CBOR payload that carries either a CoMID (Section 5), a CoSWID [RFC9393], or a CoBOM Section 6. $concise-tag-type-choice /= tagged-concise-swid-tag $concise-tag-type-choice /= tagged-concise-mid-tag $concise-tag-type-choice /= tagged-concise-bom-tag 4.1.3. Locator Map The locator map contains pointers to repositories where dependent manifests, certificates, or other relevant information can be retrieved by the Verifier. corim-locator-map = { &(href: 0) => uri ? &(thumbprint: 1) => digest } The following describes each child element of this type. * href (index 0): URI identifying the additional resource that can be fetched * thumbprint (index 1): expected digest of the resource referenced by href. See Section 7.7. 4.1.4. Profile Types Profiling is the mechanism that allows the base CoRIM schema to be customised to fit a specific Attester. A profile defines which of the optional parts of a CoRIM are required, which are prohibited and which extension points are exercised and how. A profile MUST NOT alter the syntax or semantics of CoRIM types defined in this document. A profile MAY constrain the values of a given CoRIM type to a subset of the values. A profile MAY extend the set of a given CoRIM type using the defined extension points (see Section 5.2). Exercised extension points should preserve the intent of the original semantics. CoRIM profiles SHOULD be specified in a publicly available document. Birkholz, et al. Expires 9 January 2025 [Page 13] Internet-Draft CoRIM July 2024 A CoRIM profile can use one of the base CoRIM media types defined in Section 11.6.1 and Section 11.6.2 with the profile parameter set to the appropriate value. Alternatively, it MAY define and register its own media type. A profile identifier is either an OID [RFC9090] or a URL [STD66]. The profile identifier uniquely identifies a documented profile. Any changes to the profile, even the slightest deviation, is considered a different profile that MUST have a different identifier. $profile-type-choice /= uri $profile-type-choice /= tagged-oid-type For an example profile definition, see [I-D.fdb-rats-psa-endorsements]. 4.1.5. Entities The CoRIM Entity is an instantiation of the Entity generic (Section 7.2) using a $corim-role-type-choice. The only role defined in this specification for a CoRIM Entity is manifest-creator. The $$corim-entity-map-extension extension socket is empty in this specification. corim-entity-map = entity-map<$corim-role-type-choice, $$corim-entity-map-extension> $corim-role-type-choice /= &(manifest-creator: 1) 4.2. Signed CoRIM signed-corim = #6.18(COSE-Sign1-corim) Signing a CoRIM follows the procedures defined in CBOR Object Signing and Encryption [STD96]. A CoRIM tag MUST be wrapped in a COSE_Sign1 structure. The CoRIM MUST be signed by the CoRIM creator. The following CDDL specification defines a restrictive subset of COSE header parameters that MUST be used in the protected header alongside additional information about the CoRIM encoded in a corim-meta-map (Section 4.2.2). Birkholz, et al. Expires 9 January 2025 [Page 14] Internet-Draft CoRIM July 2024 COSE-Sign1-corim = [ protected: bstr .cbor protected-corim-header-map unprotected: unprotected-corim-header-map payload: bstr .cbor tagged-corim-map signature: bstr ] The following describes each child element of this type. * protected: A CBOR Encoded protected header which is protected by the COSE signature. Contains information as given by Protected Header Map below. * unprotected: A COSE header that is not protected by COSE signature. * payload: A CBOR encoded tagged CoRIM. * signature: A COSE signature block which is the signature over the protected and payload components of the signed CoRIM. 4.2.1. Protected Header Map protected-corim-header-map = { &(alg: 1) => int &(content-type: 3) => "application/corim-unsigned+cbor" &(kid: 4) => bstr &(corim-meta: 8) => bstr .cbor corim-meta-map * cose-label => cose-value } The CoRIM protected header map uses some common COSE header parameters plus an additional corim-meta parameter. The following describes each child item of this map. * alg (index 1): An integer that identifies a signature algorithm. * content-type (index 3): A string that represents the "MIME Content type" carried in the CoRIM payload. * kid (index 4): A bit string which is a key identity pertaining to the CoRIM Issuer. * corim-meta (index 8): A map that contains metadata associated with a signed CoRIM. Described in Section 4.2.2. Additional data can be included in the COSE header map as per Section 3 of [STD96]. Birkholz, et al. Expires 9 January 2025 [Page 15] Internet-Draft CoRIM July 2024 4.2.2. Meta Map The CoRIM meta map identifies the entity or entities that create and sign the CoRIM. This ensures the consumer is able to identify credentials used to authenticate its signer. corim-meta-map = { &(signer: 0) => corim-signer-map ? &(signature-validity: 1) => validity-map } The following describes each child item of this group. * signer (index 0): Information about the entity that signs the CoRIM. Described in Section 4.2.2.1 * signature-validity (index 1): Validity period for the CoRIM. Described in Section 7.3 4.2.2.1. Signer Map corim-signer-map = { &(signer-name: 0) => $entity-name-type-choice ? &(signer-uri: 1) => uri * $$corim-signer-map-extension } * signer-name (index 0): Name of the organization that performs the signer role * signer-uri (index 1): A URI identifying the same organization * $$corim-signer-map-extension: Extension point for future expansion of the Signer map. 4.2.3. Unprotected CoRIM Header Map unprotected-corim-header-map = { * cose-label => cose-value } 5. Concise Module Identifier (CoMID) A CoMID tag contains information about hardware, firmware, or module composition. Birkholz, et al. Expires 9 January 2025 [Page 16] Internet-Draft CoRIM July 2024 Each CoMID has a unique ID that is used to unambigously identify CoMID instances when cross referencing CoMID tags, for example in typed link relations, or in a CoBOM tag. A CoMID defines several types of Claims, using "triples" semantics. At a high level, a triple is a statement that links a subject to an object via a predicate. CoMID triples typically encode assertions made by the CoRIM author about Attesting or Target Environments and their security features, for example measurements, cryptographic key material, etc. The set of triples is extensible. The following triples are currently defined: * Reference Values triples: containing Reference Values that are expected to match Evidence for a given Target Environment (Section 5.1.4.2). * Endorsed Values triples: containing "Endorsed Values", i.e., features about an Environment that do not appear in Evidence. Specific examples include testing or certification data pertaining to a module (Section 5.1.4.3). * Device Identity triples: containing cryptographic credentials - for example, an IDevID - uniquely identifying a device (Section 5.1.4.4). * Attestation Key triples: containing cryptographic keys that are used to verify the integrity protection on the Evidence received from the Attester (Section 5.1.4.5). * Domain dependency triples: describing trust relationships between domains, i.e., collection of related environments and their measurements (Section 5.1.4.6). * Domain membership triples: describing topological relationships between (sub-)modules. For example, in a composite Attester comprising multiple sub-Attesters (sub-modules), this triple can be used to define the topological relationship between lead- and sub- Attester environments (Section 5.1.4.7). * CoMID-CoSWID linking triples: associating a Target Environment with existing CoSWID tags (Section 5.1.4.8). Birkholz, et al. Expires 9 January 2025 [Page 17] Internet-Draft CoRIM July 2024 5.1. Structure The CDDL specification for the concise-mid-tag map is as follows and this rule and its constraints MUST be followed when creating or validating a CoMID tag: concise-mid-tag = { ? &(language: 0) => text &(tag-identity: 1) => tag-identity-map ? &(entities: 2) => [ + comid-entity-map ] ? &(linked-tags: 3) => [ + linked-tag-map ] &(triples: 4) => triples-map * $$concise-mid-tag-extension } The following describes each member of the concise-mid-tag map. * lang (index 0): A textual language tag that conforms with IANA "Language Subtag Registry" [IANA.language-subtag-registry]. The context of the specified language applies to all sibling and descendant textual values, unless a descendant object has defined a different language tag. Thus, a new context is established when a descendant object redefines a new language tag. All textual values within a given context MUST be considered expressed in the specified language. * tag-identity (index 1): A tag-identity-map containing unique identification information for the CoMID. Described in Section 5.1.1. * entities (index 2): Provides information about one or more organizations responsible for producing the CoMID tag. Described in Section 5.1.2. * linked-tags (index 3): A list of one or more linked-tag-map (described in Section 5.1.3), providing typed relationships between this and other CoMIDs. * triples (index 4): One or more triples providing information specific to the described module, e.g.: reference or endorsed values, cryptographic material, or structural relationship between the described module and other modules. Described in (Section 5.1.4). 5.1.1. Tag Identity Birkholz, et al. Expires 9 January 2025 [Page 18] Internet-Draft CoRIM July 2024 tag-identity-map = { &(tag-id: 0) => $tag-id-type-choice ? &(tag-version: 1) => tag-version-type } The following describes each member of the tag-identity-map. * tag-id (index 0): A universally unique identifier for the CoMID. Described in Section 5.1.1.1. * tag-version (index 1): Optional versioning information for the tag-id . Described in Section 5.1.1.2. 5.1.1.1. Tag ID $tag-id-type-choice /= tstr $tag-id-type-choice /= uuid-type A Tag ID is either a 16-byte binary string, or a textual identifier, uniquely referencing the CoMID. The tag identifier MUST be globally unique. Failure to ensure global uniqueness can create ambiguity in tag use since the tag-id serves as the global key for matching, lookups and linking. If represented as a 16-byte binary string, the identifier MUST be a valid universally unique identifier as defined by [RFC4122]. There are no strict guidelines on how the identifier is structured, but examples include a 16-byte GUID (e.g., class 4 UUID) [RFC4122], or a URI [STD66]. 5.1.1.2. Tag Version tag-version-type = uint .default 0 Tag Version is an integer value that indicates the specific release revision of the tag. Typically, the initial value of this field is set to 0 and the value is increased for subsequent tags produced for the same module release. This value allows a CoMID tag producer to correct an incorrect tag previously released without indicating a change to the underlying module the tag represents. For example, the tag version could be changed to add new metadata, to correct a broken link, to add a missing reference value, etc. When producing a revised tag, the new tag-version value MUST be greater than the old tag-version value. 5.1.2. Entities comid-entity-map = entity-map<$comid-role-type-choice, $$comid-entity-map-extension> Birkholz, et al. Expires 9 January 2025 [Page 19] Internet-Draft CoRIM July 2024 The CoMID Entity is an instantiation of the Entity generic (Section 7.2) using a $comid-role-type-choice. The $$comid-entity-map-extension extension socket is empty in this specification. $comid-role-type-choice /= &(tag-creator: 0) $comid-role-type-choice /= &(creator: 1) $comid-role-type-choice /= &(maintainer: 2) The roles defined for a CoMID entity are: * tag-creator (value 0): creator of the CoMID tag. * creator (value 1): original maker of the module described by the CoMID tag. * maintainer (value 2): an entity making changes to the module described by the CoMID tag. 5.1.3. Linked Tag The linked tag map represents a typed relationship between the embedding CoMID tag (the source) and another CoMID tag (the target). linked-tag-map = { &(linked-tag-id: 0) => $tag-id-type-choice &(tag-rel: 1) => $tag-rel-type-choice } The following describes each member of the tag-identity-map. * linked-tag-id (index 0): Unique identifier for the target tag. For the definition see Section 5.1.1.1. * tag-rel (index 1): the kind of relation linking the source tag to the target identified by linked-tag-id. $tag-rel-type-choice /= &(supplements: 0) $tag-rel-type-choice /= &(replaces: 1) The relations defined in this specification are: * supplements (value 0): the source tag provides additional information about the module described in the target tag. Birkholz, et al. Expires 9 January 2025 [Page 20] Internet-Draft CoRIM July 2024 * replaces (value 1): the source tag corrects erroneous information contained in the target tag. The information in the target MUST be disregarded. 5.1.4. Triples The triples-map contains all the CoMID triples broken down per category. Not all category need to be present but at least one category MUST be present and contain at least one entry. triples-map = non-empty<{ ? &(reference-triples: 0) => [ + reference-triple-record ] ? &(endorsed-triples: 1) => [ + endorsed-triple-record ] ? &(identity-triples: 2) => [ + identity-triple-record ] ? &(attest-key-triples: 3) => [ + attest-key-triple-record ] ? &(dependency-triples: 4) => [ + domain-dependency-triple-record ] ? &(membership-triples: 5) => [ + domain-membership-triple-record ] ? &(coswid-triples: 6) => [ + coswid-triple-record ] ? &(conditional-endorsement-series-triples: 8) => [ + conditional-endorsement-series-triple-record ] ? &(conditional-endorsement-triples: 10) => [ + conditional-endorsement-triple-record ] * $$triples-map-extension }> The following describes each member of the triples-map: * reference-triples (index 0): Triples containing reference values. Described in Section 5.1.4.2. * endorsed-triples (index 1): Triples containing endorsed values. Described in Section 5.1.4.3. * identity-triples (index 2): Triples containing identity credentials. Described in Section 5.1.4.4. * attest-key-triples (index 3): Triples containing verification keys associated with attesting environments. Described in Section 5.1.4.5. Birkholz, et al. Expires 9 January 2025 [Page 21] Internet-Draft CoRIM July 2024 * dependency-triples (index 4): Triples describing trust relationships between domains. Described in Section 5.1.4.6. * membership-triples (index 5): Triples describing topological relationships between (sub-)modules. Described in Section 5.1.4.7. * coswid-triples (index 6): Triples associating modules with existing CoSWID tags. Described in Section 5.1.4.8. * conditional-endorsement-series-triples (index 8) Triples describing a series of conditional Endorsements based on the acceptance of a stateful environment. Described in Section 5.1.4.9. * conditional-endorsement-triples (index 9) Triples describing a series of Endorsement that are applicable based on the acceptance of a series of stateful environment records. Described in Section 5.1.4.10. 5.1.4.1. Environments An environment-map may be used to represent a whole Attester, an Attesting Environment, or a Target Environment. The exact semantic depends on the context (triple) in which the environment is used. An environment is named after a class, instance or group identifier (or a combination thereof). An environment MUST be globally unique. The combination of values within class-map must combine to form a globally unique identifier. environment-map = non-empty<{ ? &(class: 0) => class-map ? &(instance: 1) => $instance-id-type-choice ? &(group: 2) => $group-id-type-choice }> The following describes each member of the environment-map: * class (index 0): Contains "class" attributes associated with the module. Described in Section 5.1.4.1.1. * instance (index 1): Contains a unique identifier of a module's instance. See Section 5.1.4.1.2. * group (index 2): identifier for a group of instances, e.g., if an anonymization scheme is used. Birkholz, et al. Expires 9 January 2025 [Page 22] Internet-Draft CoRIM July 2024 5.1.4.1.1. Environment Class The Class name consists of class attributes that distinguish the class of environment from other classes. The class attributes include class-id, vendor, model, layer, and index. The CoMID author determines which attributes are needed. class-map = non-empty<{ ? &(class-id: 0) => $class-id-type-choice ? &(vendor: 1) => tstr ? &(model: 2) => tstr ? &(layer: 3) => uint ? &(index: 4) => uint }> $class-id-type-choice /= tagged-oid-type $class-id-type-choice /= tagged-uuid-type $class-id-type-choice /= tagged-bytes The following describes each member of the class-map: * class-id (index 0): Identifies the environment via a well-known identifier. Typically, class-id is an object identifier (OID) variable-length opaque byte string (Section 7.8) or universally unique identifier (UUID). Use of this attribute is preferred. * vendor (index 1): Identifies the entity responsible for choosing values for the other class attributes that do not already have naming authority. * model (index 2): Describes a product, generation, and family. If populated, vendor MUST also be populated. * layer (index 3): Is used to capture where in a sequence the environment exists. For example, the order in which bootstrap code is executed may have security relevance. * index (index 4): Is used when there are clones (i.e., multiple instances) of the same class of environment. Each clone is given a different index value to disambiguate it from the other clones. For example, given a chassis with several network interface controllers (NIC), each NIC can be given a different index value. 5.1.4.1.2. Environment Instance An instance carries a unique identifier that is reliably bound to a Target Environment that is an instance of the Attester. Birkholz, et al. Expires 9 January 2025 [Page 23] Internet-Draft CoRIM July 2024 The types defined for an instance identifier are CBOR tagged expressions of UEID, UUID, variable-length opaque byte string (Section 7.8), or cryptographic key identifier. $instance-id-type-choice /= tagged-ueid-type $instance-id-type-choice /= tagged-uuid-type $instance-id-type-choice /= $crypto-key-type-choice $instance-id-type-choice /= tagged-bytes 5.1.4.1.3. Environment Group A group carries a unique identifier that is reliably bound to a group of Attesters, for example when a number of Attester are hidden in the same anonymity set. The types defined for a group identified are UUID and variable-length opaque byte string (Section 7.8). $group-id-type-choice /= tagged-uuid-type $group-id-type-choice /= tagged-bytes 5.1.4.1.4. Measurements Measurements can be of a variety of things including software, firmware, configuration files, read-only memory, fuses, IO ring configuration, partial reconfiguration regions, etc. Measurements comprise raw values, digests, or status information. An environment has one or more measurable elements. Each element can have a dedicated measurement or multiple elements could be combined into a single measurement. Measurements can have class, instance or group scope. This is typically determined by the triple's environment. Class measurements apply generally to all the Attesters in the given class. Instance measurements apply to a specific Attester instance. Environments identified by a class identifier have measurements that are common to the class. Environments identified by an instance identifier have measurements that are specific to that instance. The supply chain entity that is responsible for providing the the measurements (i.e. Reference Values or Endorsed Values) is by default the CoRIM signer. If a different entity is authorized to provide measurement values, the authorized-by statement can be supplied in the measurement-map. Birkholz, et al. Expires 9 January 2025 [Page 24] Internet-Draft CoRIM July 2024 measurement-map = { ? &(mkey: 0) => $measured-element-type-choice &(mval: 1) => measurement-values-map ? &(authorized-by: 2) => [ + $crypto-key-type-choice ] } The following describes each member of the measurement-map: * mkey (index 0): An optional unique identifier of the measured (sub-)environment. See Section 5.1.4.1.4.1. * mval (index 1): The measurements associated with the (sub-)environment. Described in Section 5.1.4.1.4.2. * authorized-by (index 2): The cryptographic identity of the individual or organization that is the designated authority for this measurement. For example, producer of the measurement or a delegated supplier. 5.1.4.1.4.1. Measurement Keys The types defined for a measurement identifier are OID, UUID or uint. $measured-element-type-choice /= tagged-oid-type $measured-element-type-choice /= tagged-uuid-type $measured-element-type-choice /= uint 5.1.4.1.4.2. Measurement Values A measurement-values-map contains measurements associated with a certain environment. Depending on the context (triple) in which they are found, elements in a measurement-values-map can represent class or instance measurements. Note that some of the elements have instance scope only. Measurement values may support use cases beyond Verifier appraisal. Typically, a Relying Party determines if additional processing is desirable and whether the processing is applied by the Verifier or the Relying Party. Birkholz, et al. Expires 9 January 2025 [Page 25] Internet-Draft CoRIM July 2024 measurement-values-map = non-empty<{ ? &(version: 0) => version-map ? &(svn: 1) => svn-type-choice ? &(digests: 2) => digests-type ? &(flags: 3) => flags-map ? ( &(raw-value: 4) => $raw-value-type-choice, ? &(raw-value-mask: 5) => raw-value-mask-type ) ? &(mac-addr: 6) => mac-addr-type-choice ? &(ip-addr: 7) => ip-addr-type-choice ? &(serial-number: 8) => text ? &(ueid: 9) => ueid-type ? &(uuid: 10) => uuid-type ? &(name: 11) => text ? &(cryptokeys: 13) => [ + $crypto-key-type-choice ] ? &(integrity-registers: 14) => integrity-registers * $$measurement-values-map-extension }> The following describes each member of the measurement-values-map. * version (index 0): Typically changes whenever the measured environment is updated. Described in Section 5.1.4.1.4.3. * svn (index 1): The security version number typically changes only when a security relevant change is made to the measured environment. Described in Section 5.1.4.1.4.4. * digests (index 2): Contains the digest(s) of the measured environment together with the respective hash algorithm used in the process. It uses the digests-type described in Section 7.7. * flags (index 3): Describes security relevant operational modes. For example, whether the environment is in a debug mode, recovery mode, not fully configured, not secure, not replay protected or not integrity protected. The flags field indicates which operational modes are currently associated with measured environment. Described in Section 5.1.4.1.4.5. Birkholz, et al. Expires 9 January 2025 [Page 26] Internet-Draft CoRIM July 2024 * raw-value (index 4): Contains the actual (not hashed) value of the element. An optional raw-value-mask (index 5) indicates which bits in the raw-value field are relevant for verification. A mask of all ones ("1") means all bits in the raw-value field are relevant. Multiple values could be combined to create a single raw-value attribute. The vendor determines how to pack multiple values into a single raw-value structure. The same packing format is used when collecting Evidence so that Reference Values and collected values are bit-wise comparable. The vendor determines the encoding of raw-value and the corresponding raw-value-mask. * mac-addr (index 6): A EUI-48 or EUI-64 MAC address associated with the measured environment. Described in Section 5.1.4.1.4.7. * ip-addr (index 7): An IPv4 or IPv6 address associated with the measured environment. Described in Section 5.1.4.1.4.7. * serial-number (index 8): A text string representing the product serial number. * ueid (index 9): UEID associated with the measured environment. See Section 7.5. * uuid (index 10): UUID associated with the measured environment. See Section 7.4. * name (index 11): a name associated with the measured environment. * cryptokeys (index 13): identifies cryptographic keys that are protected by the Target Environment See Section 5.1.4.1.5 for the supported formats. An Attesting Environment determines that keys are protected as part of Claims collection. Appraisal verifies that, for each value in cryptokeys, there is a matching Reference Value entry. Matching is described in Section 8.11.2.1.4. * integrity-registers (index 14): A group of one or more named measurements associated with the environment. Described in Section 5.1.4.1.6. 5.1.4.1.4.3. Version A version-map contains details about the versioning of a measured environment. version-map = { &(version: 0) => text ? &(version-scheme: 1) => $version-scheme } Birkholz, et al. Expires 9 January 2025 [Page 27] Internet-Draft CoRIM July 2024 The following describes each member of the version-map: * version (index 0): the version string * version-scheme (index 1): an optional indicator of the versioning convention used in the version attribute. Defined in Section 4.1 of [RFC9393]. The CDDL is copied below for convenience. $version-scheme /= &(multipartnumeric: 1) $version-scheme /= &(multipartnumeric-suffix: 2) $version-scheme /= &(alphanumeric: 3) $version-scheme /= &(decimal: 4) $version-scheme /= &(semver: 16384) $version-scheme /= int / text 5.1.4.1.4.4. Security Version Number The following details the security version number (svn) and the minimum security version number (min-svn) statements. A security version number is used to track changes to an object (e.g., a secure enclave, a boot loader executable, a configuration file, etc.) that are security relevant. Rollback of a security relevant change is considered to be an attack vector, as such, security version numbers can't be decremented. If a security relevant flaw is discovered in the Target Environment and subsequently fiexed, the svn value is typically incremented. There may be several revisions to a Target Environment that are in use at the same time. If there are multiple revisions with different svn values, the revision with a lower svn value may or may not be in a security critical condition. The Endorser may provide a minimum security version number using min-svn to specify the lowest svn value that is acceptable. svn values that are equal to or greater than min- svn do not signal a security critical condition. svn values that are below min-svn are in a security critical condition that is unsafe for normal use. The svn-type-choice measurement consists of a tagged-svn or tagged- min-svn value. The tagged-svn and tagged-min-svn tags are CBOR tags with the values #6.552 and #6.553 respectively. svn-type = uint svn = svn-type min-svn = svn-type tagged-svn = #6.552(svn) tagged-min-svn = #6.553(min-svn) svn-type-choice = tagged-svn / tagged-min-svn Birkholz, et al. Expires 9 January 2025 [Page 28] Internet-Draft CoRIM July 2024 5.1.4.1.4.5. Flags The flags-map measurement describes a number of boolean operational modes. If a flags-map value is not specified, then the operational mode is unknown. flags-map = { ? &(is-configured: 0) => bool ? &(is-secure: 1) => bool ? &(is-recovery: 2) => bool ? &(is-debug: 3) => bool ? &(is-replay-protected: 4) => bool ? &(is-integrity-protected: 5) => bool ? &(is-runtime-meas: 6) => bool ? &(is-immutable: 7) => bool ? &(is-tcb: 8) => bool ? &(is-confidentiality-protected: 9) => bool * $$flags-map-extension } The following describes each member of the flags-map: * is-configured (index 0): If the flag is true, the measured environment is fully configured for normal operation. * is-secure (index 1): If the flag is true, the measured environment's configurable security settings are fully enabled. * is-recovery (index 2): If the flag is true, the measured environment is in recovery mode. * is-debug (index 3): If the flag is true, the measured environment is in a debug enabled mode. * is-replay-protected (index 4): If the flag is true, the measured environment is protected from replay by a previous image that differs from the current image. * is-integrity-protected (index 5): If the flag is true, the measured environment is protected from unauthorized update. * is-runtime-meas (index 6): If the flag is true, the measured environment is measured after being loaded into memory. * is-immutable (index 7): If the flag is true, the measured environment is immutable. Birkholz, et al. Expires 9 January 2025 [Page 29] Internet-Draft CoRIM July 2024 * is-tcb (index 8): If the flag is true, the measured environment is a trusted computing base. * is-confidentiality-protected (index 9): If the flag is true, the measured environment is confidentiality protected. For example, if the measured environment consists of memory, the sensitive values in memory are encrypted. 5.1.4.1.4.6. Raw Values Types Raw value measurements are typically vendor defined values that are checked by Verifiers for consistency only, since the security relevance is opaque to Verifiers. There are two parts to a raw-value-group, a measurement and an optional mask. The default raw value measurement is of type tagged- bytes (Section 7.8). Additional raw value types can be defined, but must be CBOR tagged so that parsers can distinguish between the various semantics of type values. The mask is applied by the Verifier as part of appraisal. Only the raw value bits with corresponding TRUE mask bits are compared during appraisal. When a new raw value type is defined, the convention for applying the mask is also defined. Typically, a CoRIM profile is used to define new raw values and mask semantics. $raw-value-type-choice /= tagged-bytes raw-value-mask-type = bytes 5.1.4.1.4.7. Address Types The types or associating addressing information to a measured environment are: ip-addr-type-choice = ip4-addr-type / ip6-addr-type ip4-addr-type = bytes .size 4 ip6-addr-type = bytes .size 16 mac-addr-type-choice = eui48-addr-type / eui64-addr-type eui48-addr-type = bytes .size 6 eui64-addr-type = bytes .size 8 Birkholz, et al. Expires 9 January 2025 [Page 30] Internet-Draft CoRIM July 2024 5.1.4.1.5. Crypto Keys A cryptographic key can be one of the following formats: * tagged-pkix-base64-key-type: PEM encoded SubjectPublicKeyInfo. Defined in Section 13 of [RFC7468]. * tagged-pkix-base64-cert-type: PEM encoded X.509 public key certificate. Defined in Section 5 of [RFC7468]. * tagged-pkix-base64-cert-path-type: X.509 certificate chain created by the concatenation of as many PEM encoded X.509 certificates as needed. The certificates MUST be concatenated in order so that each directly certifies the one preceding. * tagged-cose-key-type: CBOR encoded COSE_Key or COSE_KeySet. Defined in Section 7 of [STD96] A cryptographic key digest can be one of the following formats: * tagged-thumbprint-type: a digest of a raw public key. The digest value may be used to find the public key if contained in a lookup table. * tagged-cert-thumbprint-type: a digest of a certificate. The digest value may be used to find the certificate if contained in a lookup table. * tagged-cert-path-thumbprint-type: a digest of a certification path. The digest value may be used to find the certificate path if contained in a lookup table. $crypto-key-type-choice /= tagged-pkix-base64-key-type $crypto-key-type-choice /= tagged-pkix-base64-cert-type $crypto-key-type-choice /= tagged-pkix-base64-cert-path-type $crypto-key-type-choice /= tagged-cose-key-type $crypto-key-type-choice /= tagged-thumbprint-type $crypto-key-type-choice /= tagged-cert-thumbprint-type $crypto-key-type-choice /= tagged-cert-path-thumbprint-type tagged-pkix-base64-key-type = #6.554(tstr) tagged-pkix-base64-cert-type = #6.555(tstr) tagged-pkix-base64-cert-path-type = #6.556(tstr) tagged-thumbprint-type = #6.557(digest) tagged-cose-key-type = #6.558(COSE_KeySet / COSE_Key) tagged-cert-thumbprint-type = #6.559(digest) tagged-cert-path-thumbprint-type = #6.561(digest) Birkholz, et al. Expires 9 January 2025 [Page 31] Internet-Draft CoRIM July 2024 5.1.4.1.6. Integrity Registers An Integrity Registers map groups together one or more measured "objects". Each measured object has a unique identifier and one or more associated digests. Identifiers are either unsigned integers or text strings and their type matters, e.g., unsigned integer 5 is distinct from the text string "5". The digests use digests-type semantics (Section 7.7). integrity-register-id-type-choice = uint / text integrity-registers = { + integrity-register-id-type-choice => digests-type } All the measured objects in an Integrity Registers map are explicitly named and the order in which they appear in the map is irrelevant. Any digests associated with a measured object represent an acceptable state for the object. Therefore, if multiple digests are provided, the acceptable state is their cross-product. For example, given the following Integrity Registers: { 0: [ [ 0, h'00' ] ], 1: [ [ 0, h'11' ], [ 1, h'12' ] ] } then both { 0: [ 0, h'00' ], 1: [ 0, h'11' ] } and { 0: [ 0, h'00' ], 1: [ 1, h'12' ] } are acceptable states. Integrity Registers can be used to model the PCRs in a TPM or vTPM, in which case the identifier is the register index, or other kinds of vendor-specific measured objects. Birkholz, et al. Expires 9 January 2025 [Page 32] Internet-Draft CoRIM July 2024 5.1.4.1.7. Domain Types A domain is a context for bundling a collection of related environments and their measurements. The following CDDL describes domain type choices. $domain-type-choice /= uint $domain-type-choice /= text $domain-type-choice /= tagged-uuid-type $domain-type-choice /= tagged-oid-type The uint and text types MUST NOT be interpreted in a global scope. 5.1.4.2. Reference Values Triple A Reference Values triple relates reference measurements to a Target Environment. For Reference Value Claims, the subject identifies a Target Environment, the object contains measurements, and the predicate asserts that these are the expected (i.e., reference) measurements for the Target Environment. reference-triple-record = [ environment-map measurement-map ] 5.1.4.3. Endorsed Values Triple An Endorsed Values triple declares additional measurements that are valid when a Target Environment has been verified against reference measurements. For Endorsed Value Claims, the subject is either a Target or Attesting Environment, the object contains measurements, and the predicate defines semantics for how the object relates to the subject. endorsed-triple-record = [ environment-map measurement-map ] Birkholz, et al. Expires 9 January 2025 [Page 33] Internet-Draft CoRIM July 2024 5.1.4.4. Device Identity Triple A Device Identity triple record relates one or more cryptographic keys to a device identity. The cryptographic keys are bound to or associated with a Target Environment that is within the device. The device identifier may be part of the Target Environment's environment-map or may be part of some other device identity credential, such as a certificate. The cryptographic keys are expected to be used to authenticate the device. Device Identity triples instruct a Verifier to perform key validation checks, such as revocation, certificate path construction & verification, or proof of possession. The Verifier SHOULD perform offline verification of keys contained in Device Identity triples. A Device Identity triple endorses that the keys were securely provisioned to the named Target Environment. Additional details about how a key was provisioned or is protected may be asserted using Endorsements such as endorsed-triples. Depending on key formatting, as defined by $crypto-key-type-choice, the Verifier may take different steps to locate and verify the key. If a key has usage restrictions that limit its use to device identity challenges, Verifiers SHOULD check for key use that violates usage restrictions. Offline verification of keys or verification of key use restrictions MAY produce Claims that are added to the ACS. Alternatively, Verifiers MAY report key verification results as part of an error reporting function. identity-triple-record = [ environment-map [ + $crypto-key-type-choice ] ] 5.1.4.5. Attest Key Triple An Attest Key triple record relates one or more cryptographic keys to an Attesting Environment. The cryptographic keys are wielded by an Attesting Environment that collects measurements from a Target Environment. The cryptographic keys sign Evidence. Attest Key triples instruct a Verifier to perform key validation checks, such as revocation, certificate path construction & verification, or proof of possession. The Verifier SHOULD perform offline verification of keys contained in Attest Key triples. Birkholz, et al. Expires 9 January 2025 [Page 34] Internet-Draft CoRIM July 2024 Attest Key triples endorse that the keys were securely provisioned to the named (identified via an environment-map) Attesting Environment. Additional details about how a key was provisioned or is protected may be asserted using Endorsements such as endorsed-triples. Depending on key formatting, as defined by $crypto-key-type-choice, the Verifier may take different steps to locate and verify the key. If a key has usage restrictions that limits its use to Evidence signing, Verifiers SHOULD check for key use that violates usage restrictions. Offline verification of keys or verification of key use restrictions MAY produce Claims that are added to the ACS. Alternatively, Verifiers MAY report key verification results as part of an error reporting function. attest-key-triple-record = [ environment-map [ + $crypto-key-type-choice ] ] 5.1.4.6. Domain Dependency Triple A Domain Dependency triple defines trust dependencies between measurement sources. The subject identifies a domain (Section 5.1.4.1.7) that has a predicate relationship to the object containing one or more dependent domains. Dependency means the subject domain's trustworthiness properties rely on the object domain(s) trustworthiness having been established before the trustworthiness properties of the subject domain exists. domain-dependency-triple-record = [ $domain-type-choice [ + $domain-type-choice ] ] 5.1.4.7. Domain Membership Triple A Domain Membership triple assigns domain membership to environments. The subject identifies a domain (Section 5.1.4.1.7) that has a predicate relationship to the object containing one or more environments. Endorsed environments (Section 5.1.4.3) membership is conditional upon successful matching of Reference Values (Section 5.1.4.2) to Evidence. Birkholz, et al. Expires 9 January 2025 [Page 35] Internet-Draft CoRIM July 2024 domain-membership-triple-record = [ $domain-type-choice [ + environment-map ] ] 5.1.4.8. CoMID-CoSWID Linking Triple A CoSWID triple relates reference measurements contained in one or more CoSWIDs to a Target Environment. The subject identifies a Target Environment, the object one or more unique tag identifiers of existing CoSWIDs, and the predicate asserts that these contain the expected (i.e., reference) measurements for the Target Environment. coswid-triple-record = [ environment-map [ + concise-swid-tag-id ] ] concise-swid-tag-id = text / bstr .size 16 5.1.4.9. Conditional Endorsement Series Triple A Conditional Endorsement Series triple uses a stateful environment, (i.e., stateful-environment-record), that identifies a Target Environment based on an environment-map plus the measurement-map measurements that have matching Evidence. The stateful Target Environment is a triple subject that MUST be satisfied before the series triple object is matched. ; an environment with a set of measurements that must match evidence stateful-environment-record = [ environment-map, measurement-map ] The series object is an array of conditional-series-record that has both Reference and Endorsed Values. Each conditional-series-record record is evaluated in the order it appears in the series array. The Endorsed Values are accepted if the series condition in a conditional-series-record matches the ACS. The first conditional- series-record that successfully matches an ACS Entry terminates the matching and the corresponding Endorsed Values are accepted. If none of the series conditions match an ACS Entry, the triple is not matched, and no Endorsed values are accepted. Birkholz, et al. Expires 9 January 2025 [Page 36] Internet-Draft CoRIM July 2024 The authorized-by value in measurement-map in the stateful environment, if present, applies to all measurements in the triple, including conditional-series-record records. conditional-endorsement-series-triple-record = [ stateful-environment-record ; order matters: the first matching record wins and halts matching [ + conditional-series-record ] ] conditional-series-record = [ ; reference values to be matched against evidence refv: measurement-values-map ; endorsed values that apply in case revf matches endv: measurement-values-map ] 5.1.4.10. Conditional Endorsement Triple The semantics of the Conditional Endorsement Triple is as follows: "IF accepted state matches all conds values, THEN every entry in the endorsements is added to the accepted state" conditional-endorsement-triple-record = [ conditions: [ + stateful-environment-record ] endorsements: [ + endorsed-triple-record ] ] A conditional-endorsement-triple-record has the following parameters: * conditions: all target environments, along with a specific state, that need to match state-triples entries in the ACS for the endorsement(s) to apply * endorsements: endorsements that are added to the ACS state-triples if all conds match. The order in which Conditional Endorsement triples are evaluated is important: different sorting may produce different end-results in the computed ACS. Therefore, the set of applicable Conditional Endorsement triples MUST be topologically sorted based on the criterion that a Conditional Endorsement triple is evaluated before another if its Target Environment and Endorsement pair is found in any of the stateful environments of the subsequent triple. Birkholz, et al. Expires 9 January 2025 [Page 37] Internet-Draft CoRIM July 2024 Notes: * In order to give the expected result, the condition must describe the expected context completely. * The scope of a single Conditional Endorsement triple encompasses an arbitrary amount of environments across all layers in an Attester. There are scope-related questions that need to be answered. ( // Tracked at: https://github.com/ietf-rats-wg/draft-ietf-rats-corim/ issues/176) 5.2. Extensibility The base CORIM schema is described using CDDL [RFC8610] that can be extended only at specific allowed points known as "extension points" The following types of extensions are supported in CoRIM 5.2.1. Map Extensions Map Extensions provides extensibility support to CoRIM Map structures. CDDL map extensibility enables a CoRIM profile to extend the base CoRIM definition. CDDL map extension points have the form ($$NAME-extension) where "NAME" is the name of the map and '$$' signifies map extensibility. Typically, map extension requires a convention for code point naming that avoids code-point reuse. Well- known code points may be in a registry, such as CoSWID [IANA.coswid]. Non-negative integers are reserved for IANA to assign meaning globally. 5.2.2. Data Type Extensions Data type extensibility has the form ($NAME-type-choice) where "NAME" is the type name and '$' signifies type extensibility. Schema extensions (Map or Data Type) should be documented to facilitate interoperability. CoRIM profiles are best used to document vendor or industry defined extensions. 6. CoBOM A Concise Bill of Material (CoBOM) object represents the signal for the Verifier to activate the listed tags. Verifier policy determines whether CoBOMs are required. Birkholz, et al. Expires 9 January 2025 [Page 38] Internet-Draft CoRIM July 2024 When CoBOMs are required, each tag MUST be activated by a CoBOM before being processed. All the tags listed in the CoBOM MUST be activated atomically. If any tag activated by a CoBOM is not available to the Verifier, the entire CoBOM is rejected. The number of CoBOMs required in a given supply chain ecosystem is dependent on Verifier Owner's Appraisal Policy for Evidence. Corresponding policies are often driven by the complexity and nature of the use case. If a Verifier Owner has a policy that does not require CoBOM, tags within a CoRIM received by a Verifier are activated immediately and treated valid for appraisal. There may be cases when Verifier receives CoRIMs from multiple Reference Value providers and Endorsers. In such cases, a supplier (or other authorities, such as integrators) may be designated to issue a single CoBOM to activate all the tags submitted to the Verifier in these CoRIMs. In a more complex case, there may be multiple authorities that issue CoBOMs at different points in time. An Appraisal Policy for Evidence may dictate how multiple CoBOMs are to be processed within the Verifier. 6.1. Structure The CDDL specification for the concise-bom-tag map is as follows and this rule and its constraints MUST be followed when creating or validating a CoBOM tag: concise-bom-tag = { &(tag-identity: 0) => tag-identity-map &(tags-list: 1) => [ + tag-identity-map ], &(bom-validity: 2) => validity-map * $$concise-bom-tag-extension } The following describes each member of the concise-bom-tag map. * tag-identity (index 0): A tag-identity-map containing unique identification information for the CoBOM. Described in Section 5.1.1. * tags-list (index 1): A list of one or more tag-identity-maps identifying the CoMID and CoSWID tags that constitute the "bill of material", i.e., a complete set of verification-related information. The tags-list behaves like a signaling mechanism Birkholz, et al. Expires 9 January 2025 [Page 39] Internet-Draft CoRIM July 2024 from the supply chain (e.g., a product vendor) to a Verifier that activates the tags in tags-list for use in the Evidence appraisal process. The activation is atomic: all tags listed in tags-list MUST be activated or no tags are activated. * bom-validity (index 2): Specifies the validity period of the CoBOM. Described in Section 7.3 * $$concise-bom-tag-extension: This CDDL socket is used to add new information structures to the concise-bom-tag. See Section 11.5. The $$concise-bom-tag-extension extension socket is empty in this specification. 7. Common Types The following CDDL types may be shared by CoRIM, CoMID, and CoBOM. 7.1. Non-Empty The non-empty generic type is used to express that a map with only optional members MUST at least include one of the members. non-empty = (M) .and ({ + any => any }) 7.2. Entity The entity-map is a generic type describing an organization responsible for the contents of a manifest. It is instantiated by supplying two parameters: * A role-type-choice, i.e., a selection of roles that entities of the instantiated type can claim * An extension-socket, i.e., a CDDL socket that can be used to extend the attributes associated with entities of the instantiated type entity-map = { &(entity-name: 0) => $entity-name-type-choice ? &(reg-id: 1) => uri &(role: 2) => [ + role-type-choice ] * extension-socket } $entity-name-type-choice /= text The following describes each member of the entity-map. Birkholz, et al. Expires 9 January 2025 [Page 40] Internet-Draft CoRIM July 2024 * entity-name (index 0): The name of entity which is responsible for the action(s) as defined by the role. $entity-name-type-choice can only be text. Other specifications can extend the $entity-name- type-choice (see Section 11.4). * reg-id (index 1): A URI associated with the organization that owns the entity name * role (index 2): A type choice defining the roles that the entity is claiming. The role is supplied as a parameter at the time the entity-map generic is instantiated. * extension-socket: A CDDL socket used to add new information structures to the entity-map. Examples of how the entity-map generic is instantiated can be found in Section 4.1.5 and Section 5.1.2. 7.3. Validity A validity-map represents the time interval during which the signer warrants that it will maintain information about the status of the signed object (e.g., a manifest). In a validity-map, both ends of the interval are encoded as epoch- based date/time as per Section 3.4.2 of [STD94]. validity-map = { ? &(not-before: 0) => time &(not-after: 1) => time } * not-before (index 0): the date on which the signed manifest validity period begins * not-after (index 1): the date on which the signed manifest validity period ends 7.4. UUID Used to tag a byte string as a binary UUID defined in Section 4.1.2. of [RFC4122]. uuid-type = bytes .size 16 tagged-uuid-type = #6.37(uuid-type) Birkholz, et al. Expires 9 January 2025 [Page 41] Internet-Draft CoRIM July 2024 7.5. UEID Used to tag a byte string as Universal Entity ID Claim (UUID) defined in Section 4.2.1 of [I-D.ietf-rats-eat]. ueid-type = bytes .size 33 tagged-ueid-type = #6.550(ueid-type) 7.6. OID Used to tag a byte string as the BER encoding [X.690] of an absolute object identifier [RFC9090]. oid-type = bytes tagged-oid-type = #6.111(oid-type) 7.7. Digest A digest represents the value of a hashing operation together with the hash algorithm used. The type of the digest algorithm identifier can be either int or text and is interpreted according to the [IANA.named-information] registry. Specifically, int values are matched against "ID" entries, text values are matched against "Hash Name String" entries. Whenever possible, using the int encoding is RECOMMENDED. digest = [ alg: (int / text), val: bytes ] digests-type = [ + digest ] A measurement can be obtained using different hash algorithms. A digests-type can be used to collect multiple digest values obtained by applying different hash algorithms on the same input. Each entry in the digests-type MUST have a unique alg value. 7.8. Tagged Bytes Type An opaque, variable-length byte string. It can be used in different contexts: as an instance, class or group identifier in an environment-map; as a raw value measurement in a measurement-values- map. Its semantics are defined by the context in which it is found, and by the overarching CoRIM profile. When used as an identifier the responsible allocator entity SHOULD ensure uniqueness within the context that it is used. Birkholz, et al. Expires 9 January 2025 [Page 42] Internet-Draft CoRIM July 2024 tagged-bytes = #6.560(bytes) 8. Appraisal of CoRIM-based Inputs Inputs to a Verifier are mapped from their external representation to an internal representation. CoRIM defines CBOR structures and content media types for Conceptual Messages that include Endorsements and Reference Values. CoRIM data structures may be used by Evidence and Attestation Results that wish to describe overlapping structure. CoRIM-based data structures define an external representation of Conceptual Messages that are mapped to an internal representation. Appraisal processing describes both mapping transformations and Verifier reconciliation Section 2. Non-CoRIM-based data structures require mapping transformation, but these are out of scope for this document. If a CoRIM profile is specified, there are a few well-defined points in the procedure where Verifier behaviour depends on the profile. The CoRIM profile MUST provide a description of the expected Verifier behavior for each of those well-defined points. Verifier implementations MUST exhibit the same externally visible behavior as described in this specification. They are not required to use the same internal representation or evaluation order described by this specification. 8.1. Appraisal Procedure The appraisal procedure is divided into several logical phases for clarity. * *Phase 1*: Input Validation and Transformation During Phase 1, Conceptual Message inputs are cryptographically validated, such as checking digital signatures. Inputs are transformed from their external representations to an internal representation. Internal representations are staged for appraisal processing, such as populating an input queue. * *Phase 2*: Evidence Augmentation During Phase 2, Evidence inputs are added to a list that describes the Attester's actual state. These inputs are added with the Attester's authority. * *Phase 3*: Reference Values Corroboration and Augmentation Birkholz, et al. Expires 9 January 2025 [Page 43] Internet-Draft CoRIM July 2024 During Phase 3, Reference Values inputs are compared with Evidence inputs. Reference Values inputs describe possible states of Attesters. If the actual state of the Attester is described by the possible Attester states, then the overlapping (corroborated) actual states are added to the Attester's actual state. These inputs are added with the Reference Value Provider's authority. * *Phase 4*: Endorsed Values Augmentation During Phase 4, Endorsed Values inputs containing conditions that describe expected Attester state are processed. If the comparison is satisfied, then additional Claims about the Attester are added to the ACS. These inputs are added with the Endorser's authority. * *Phase 5*: Verifier Augmentation During Phase 5, the Verifier may perform consistency, integrity, or additional validity checks. These checks may result in additional Claims about the Attester that are added to the ACS. These Claims are added with the Verifier's authority. * *Phase 6*: Policy Augmentation During Phase 6, appraisal policies are processed that describe Attester states that are desirable or undesirable. If these conditions exist, the policy may add additional Claims about the Attester, to the ACS. These Claims are added with the policy author's authority. * *Phase 7*: Attestation Results Production and Transformation During Phase 7, the outcome of Appraisal and the set of Attester Claims that are interesting to a Relying Party are copied from the Attester state to an output staging area. The Claims in the output staging area and other Verifier related metadata are transformed into an external representation suitable for consumption by a Relying Party. 8.2. Verifier Abstraction This document assumes that Verifier implementations may differ. To facilitate the description of normative Verifier behavior, this document uses an abstract representation of Verifier internals. The following terms are used: Birkholz, et al. Expires 9 January 2025 [Page 44] Internet-Draft CoRIM July 2024 Claim: A piece of information, in the form of a key-value pair. Environment-Claim Tuple (ECT): A structure containing a set of values that describe a Target Environment plus a set of measurement / Claim values that describe properties of the Target Environment. The ECT also contains authority which identifies the entity that authored the ECT. _[Ned] Suggest we use Environment-Properties Tuple (EPT) since the use of claim here is more focused than what is possible given the definition above._ reference state: Claims that describe various alternative states of a Target Environment. Reference Values Claims typically describe various possible states due to versioning, manufactruing practices, or supplier configuration options. See also Section 2 of [I-D.ietf-rats-endorsements]. actual state: Claims that describe a Target Environment instance at a given point in time. Endorsed Values and Evidence typically are Claims about actual state. An Attester may be composed of multiple components, where each component may represent a scope of appraisal. See also Section 2 of [I-D.ietf-rats-endorsements]. Authority: The entity asserting that a claim is true. Typically, a Claim is asserted using a cryptographic key to digitally sign the Claim. A cryptographic key can be a proxy for a human or organizational entity. Appraisal Claims Set (ACS): A structure that holds ECTs that have been appraised. The ACS contains Attester state that has been authorized by Verifier processing and Appraisal Policy. Appraisal Policy: A description of the conditions that, if met, allow acceptance of Claims. Typically, the entity asserting a Claim should have knowledge, expertise, or context that gives credibility to the assertion. Appraisal Policy resolves which entities are credible and under what conditions. See also "Appraisal Policy for Evidence" in [RFC9334]. Attestation Results Set (ARS): A structure that holds results of Appraisal and ECTs that are to be conveyed to a Relying Party. Birkholz, et al. Expires 9 January 2025 [Page 45] Internet-Draft CoRIM July 2024 8.2.1. Internal Representation of Conceptual Messages Conceptual Messages are the inputs to a Verifier and may include Evidence, Reference Values, Endorsed Values, or Appraisal Policy. Internal representations of Conceptual Messages are defined by Section 8.2.1.1, Section 8.2.1.2, and Section 8.2.1.3. The internal representation of Conceptual Messages are constructed from a common building block structure called Environment-Claims Tuple (ECT). Additionally, ECTs define an internal representation of the ACS and ARS. See Section 8.2.2 and Section 8.2.3. ECTs have six attributes: 1. The environment. 2. The properties of the environment. 3. The authority. 4. The name space. 5. The Conceptual Message type. 6. The profile. Environment (label 1): Identifies the Target Environment. Environments are identified using instance, class, or group identifiers. Typically, composite Attester's are composed of components, each having an environment identifier. Properties (label 2): Properties of the Target Environment. Authority (label 3): Identifies the entity that issued the tuple. A certain type of key material by which the authority (and corresponding provenance) of the tuple can be determined, such as the public key of an asymmetric key pair that is associated with an authority's PKIX certificate. Name Space (label 4): Identifies the name space from which the tuple was created. CM Type (label 5): Identifies the type of Conceptual Message that originated the tuple. Profile (label 6): The profile that defines this tuple. If no profile is used, this attribute is omitted. Birkholz, et al. Expires 9 January 2025 [Page 46] Internet-Draft CoRIM July 2024 ECT = { ? e: environment-map ? c: claims-map / [ + local-claim ] ? a: [ + $crypto-key-type-choice ] ? ns: text ? cm: cm-type ? p: $profile-type-choice } local-claim = { le: local-environment c: claims-map } local-environment = bstr / tstr cm-type = &( reference-values: 0 endorsements: 1 evidence: 2 attestation-results: 3 verifier: 4 policy: 5 ) Although all of the ECT attributes are optional, the Conceptual Message type implies certain attributes are mandatory. See Section 8.2.1.1, Section 8.2.1.2, and Section 8.2.1.3. 8.2.1.1. Internal Representation of Evidence An internal representation of attestation Evidence uses the ae relation. The addition is a list of ECTs with Evidence to be appraised. A Verifier may maintain multiple simultaneous sessions to different Attesters. Each Attester has a different ACS. The Verifier ensures the Evidence inputs are associated with the correct ACS. The addition is added to the ACS for a specific Attester. ae = [ addition: [ + ECT ] ] Birkholz, et al. Expires 9 January 2025 [Page 47] Internet-Draft CoRIM July 2024 +==========+===+===+===+====+====+===+ | Type | e | c | a | ns | cm | p | +==========+===+===+===+====+====+===+ | addition | T | T | T | F | T | F | +----------+---+---+---+----+----+---+ Table 3: Mandatory fields for Evidence tuples 'T' means mandatory. 8.2.1.2. Internal Representation of Reference Values An internal representation of Reference Values uses the rv relation, which is a list of ECTs that contains possible states and a list of ECTs that contain actual states asserted with RVP authority. The rv relation is a list of condition-addition pairings where each pairing is evaluated together. If the condition containing reference ECTs overlaps Evidence ECTs then the Evidence ECTs are re-asserted, but with RVP authority as contained in the addition. The reference ECTs define the matching conditions that are applied to Evidence ECTs. If the matching condition is satisfied, then the re- asserted ECTs are added to the ACS. rv = + { condition: ECT addition: ECT } +===========+===+===+===+====+====+===+ | Type | e | c | a | ns | cm | p | +===========+===+===+===+====+====+===+ | condition | T | T | F | F | F | F | +-----------+---+---+---+----+----+---+ | addition | T | T | T | F | T | F | +-----------+---+---+---+----+----+---+ Table 4: Mandatory fields for Reference Values tuples 8.2.1.3. Internal Representation of Endorsed Values An internal representation of Endorsed Values uses the ev and evs relations, which are lists of ECTs that describe matching conditions and the additions that are added if the conditions are satisfied. Birkholz, et al. Expires 9 January 2025 [Page 48] Internet-Draft CoRIM July 2024 The ev relation compares the condition ECTs to the ACS and if all of the ECTs are found in the ACS then the addition ECTs are added to the ACS. The evs relation compares the condition ECTs to the ACS and if all of the ECTs are found in the ACS then each entry in the series list is evaluated. The selection ECTs are compared with the ACS and if the selection criteria is satisfied, then the addition ECTs are added to the ACS and evaluation of the series ends. If the selection criteria is not satisfied, then evaluation procedes to the next series list entry. ev = [ condition: [ + ECT ] addition: [ + ECT ] ] evs = [ condition: [ + ECT ] series: + { selection: [ + ECT ] addition: [ + ECT ] } ] +===========+===+===+===+====+====+===+ | Type | e | c | a | ns | cm | p | +===========+===+===+===+====+====+===+ | condition | F | T | F | F | F | F | +-----------+---+---+---+----+----+---+ | selection | F | T | F | F | F | F | +-----------+---+---+---+----+----+---+ | addition | T | T | T | F | T | F | +-----------+---+---+---+----+----+---+ Table 5: Mandatory fields for Endorsed Values tuples 8.2.1.4. Internal Representation of Policy Statements The policy relation compares the condition ECTs to the ACS. If all of the ECTs are found in the ACS then the addition ECTs are added to the ACS with the policy author's authority. policy = [ condition: [ + ECT ] addition: [ + ECT ] ] Birkholz, et al. Expires 9 January 2025 [Page 49] Internet-Draft CoRIM July 2024 +===========+===+===+===+====+====+===+ | Type | e | c | a | ns | cm | p | +===========+===+===+===+====+====+===+ | condition | F | F | F | F | F | F | +-----------+---+---+---+----+----+---+ | addition | T | T | T | F | T | F | +-----------+---+---+---+----+----+---+ Table 6: Mandatory fields for policy tuples 8.2.1.5. Internal Representation of Attestation Results The ar relation compares the acs-condition to the ACS. If the condition is satisfied, the ars-additions are copied from the ACS to the ARS. If any of the ars-additions are not found in the ACS then these ACS entries are not copied to the ARS. ar = [ acs-condition: [ + ECT ] ars-addition: [ + ECT ] ] +===============+===+===+===+====+====+===+ | Type | e | c | a | ns | cm | p | +===============+===+===+===+====+====+===+ | acs-condition | F | F | F | F | F | F | +---------------+---+---+---+----+----+---+ | ars-addition | T | T | T | F | F | F | +---------------+---+---+---+----+----+---+ Table 7: Mandatory fields for Attestation Results tuples 8.2.2. Internal Representation of ACS An ACS is a list of ECTs that describe an Attester's actual state. ACS = [ + ECT ] 8.2.3. Internal Representation of Attestation Results Set (ARS) An ARS is a list of ECTs that describe ACS entries that are selected for use as Attestation Results. ARS = [ + ECT ] Birkholz, et al. Expires 9 January 2025 [Page 50] Internet-Draft CoRIM July 2024 8.3. Input Validation and Transformationn (Phase 1) During the initialization phase, the CoRIM Appraisal Context is loaded with various conceptual message inputs such as CoMID tags Section 5, CoSWID tags [RFC9393], CoBOM Section 6 and cryptographic validation key material (including raw public keys, root certificates, intermediate CA certificate chains, and Concise Trust Anchor Stores (CoTS, [I-D.ietf-rats-concise-ta-stores])). These objects will be utilized in the Evidence Appraisal phase that follows. The primary goal of this phase is to ensure that all necessary information is available for subsequent processing. After context initialization, additional inputs are held back until appraisal processing has completed. 8.3.1. Input Validation 8.3.1.1. CoRIM Selection All available CoRIMs are collected. CoRIMs that are not within their validity period, or that cannot be associated with an authenticated and authorised source MUST be discarded. Any CoRIM that has been secured by a cryptographic mechanism, such as a signature, that fails validation MUST be discarded. Other selection criteria MAY be applied. For example, if the Evidence format is known in advance, CoRIMs using a profile that is not understood by a Verifier can be readily discarded. The selection process MUST yield at least one usable tag. Later stages will further select the CoRIMs appropriate to the Evidence Appraisal stage. 8.3.1.2. Tags Extraction and Validation The Verifier chooses tags from the selected CoRIMs - including CoMID, CoSWID, CoBOM, and CoTS. The Verifier MUST discard all tags which are not syntactically and semantically valid. In particular, any cross-referenced triples (e.g., CoMID-CoSWID linking triples) MUST be successfully resolved. Birkholz, et al. Expires 9 January 2025 [Page 51] Internet-Draft CoRIM July 2024 8.3.1.3. CoBOM Extraction This section is not applicable if the Verifier appraisal policy does not require CoBOMs. CoBOMs which are not within their validity period are discarded. The Verifier processes all CoBOMs that are valid at the point in time of Evidence Appraisal and activates all tags referenced therein. A Verifier MAY decide to discard some of the available and valid CoBOMs depending on any locally configured authorization policies. (Such policies model the trust relationships between the Verifier Owner and the relevant suppliers, and are out of the scope of the present document.) For example, a composite device (Section 3.3 of [RFC9334]) is likely to be fully described by multiple CoRIMs, each signed by a different supplier. In such case, the Verifier Owner may instruct the Verifier to discard tags activated by supplier CoBOMs that are not also activated by the trusted integrator. After the Verifier has processed all CoBOMs it MUST discard any tags which have not been activated by a CoBOM. 8.3.2. Evidence Collection During the Evidence collection phase, the Verifier communicates with Attesters to gather Evidence. The first part of this phase does not require any cryptographic validation. This means that Verifiers can use untrusted code to discover Evidence sources. Attesters are Evidence sources. Verifiers may rely on conveyance protocol specific context to identify an Evidence source, which is the Evidence input oracle for appraisal. The collected Evidence is then transformed to an internal representation, making it suitable for appraisal processing. 8.3.2.1. Cryptographic Validation of Evidence If Evidence is cryptographically signed, its validation is applied before transforming Evidence to an internal representation. If Evidence is not cryptographically signed, the security context of the conveyance protocol that collected it is used to cryptographically validate Evidence. Birkholz, et al. Expires 9 January 2025 [Page 52] Internet-Draft CoRIM July 2024 The way cryptographic signature validation works depends on the specific Evidence collection method used. For instance, in DICE, a proof of liveness is carried out on the final key in the certificate chain (a.k.a., the alias certificate). If this is successful, a suitable certification path is looked up in the Appraisal Context, based on linking information obtained from the DeviceID certificate (see Section 9.2.1 of [DICE.Layer]). If a trusted root certificate is found, the usual X.509 certificate validation is performed. As a second example, in PSA [I-D.tschofenig-rats-psa-token] the verification public key is looked up in the appraisal context using the ueid claim found in the PSA claims-set. If found, COSE Sign1 verification is performed accordingly. Regardless of the specific integrity protection method used, the Evidence's integrity MUST be validated successfully. If a CoRIM profile is supplied, it MUST describe: - How cryptographic verification key material is represented (e.g., using Attestation Keys triples, or CoTS tags) - How key material is associated with the Attesting Environment - How the Attesting Environment is identified in Evidence 8.3.3. Input Transformation Inputs, whether Endorsements, Reference Values, Evidence, or Policies, are transformed to an internal representation that is based on ECTs. The following mapping conventions apply to all forms of input transformation: The e field is populated with a Target Environment identifier. The c field is populated with the measurements collected by an Attesting Environment. The a field is populated with the identity of the entity that asserted (e.g., signed) the Evidence. The ns field is populated with the namespace context if supplied. For example, the Attester's manufacturer may have a URI that identifies the manufacturing series, family or architecture. The cm field is set based on the type of Conceptual Message inputted or to be outputed. Birkholz, et al. Expires 9 January 2025 [Page 53] Internet-Draft CoRIM July 2024 8.3.3.1. Appraisal Context Construction All of the extracted and validated tags are loaded into an _appraisal context_. The Appraisal Context contains an internal representation of the inputted Conceptual Messages. The selected tags are mapped to the internal representation, making them suitable for appraisal processing. // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/96 8.3.3.2. Reference and Endorsed Values Tranformation The Reference Values ECT fields are populated as described above Section 8.3.3 and {#sec-ir-ref-val}. The Endorsement Values ECT fields are populated as described above Section 8.3.3 and {#sec-ir-end-val}. 8.3.3.3. Evidence Tranformation Evidence is divided up into one or more ev relations where the condition ECT identifies the Attester from which Evidence was collected. If the Verifier maintains multiple Attester sessions, the Verifier session may be identified using an ECT. Evidence information is mapped to an addition ECT that populates each of the ECT fields. If the Evidence doesn't have a value for the mandatory fields, the Verifier MUST NOT process the Evidence. The Evidence ECT fields are populated as described above Section 8.3.3 and Section 8.2.1.1. Evidence transformation algorithms may be well-known; may be defined by a CoRIM profile (Section 4.1.4); or may be supplied dynamically. The handling of dynamic Evidence transformation algorithms is out of scope for this document. 8.4. Evidence Augmentation (Phase 2) 8.4.1. Appraisal Claims Set Initialization The ACS is initialized by copying the internal representation of Evidence claims to the ACS. See Section 8.10. Birkholz, et al. Expires 9 January 2025 [Page 54] Internet-Draft CoRIM July 2024 8.4.1.1. The authorized-by field in Appraisal Claims Set The a field in an ECT in the ACS indicates the entity whose authority backs the claim. An entity is authoritative when it makes Claims that are inside its area of competence. The Verifier keeps track of the authorities that assert Claims so that it can filter out claims from entities that do not satisfy appraisal policies. When adding an Evidence Claim to the ACS, the Verifier SHALL set the authorized-by field in that Claim to the trusted authority keys at the head of each key chain which signed that Evidence. This key is often the subject of a self-signed certificate. The Verifier has already verified the certificate chain (see Section 8.3.2.1). If multiple authorities approve the same Claim, for example if multiple key chains are available, then the authorized-by field SHALL be set to include the trusted authority keys used by each of those authorities. When adding Endorsement Claims to the ACS that resulted from CoRIM processing (see Section 8.10) the Verifier SHALL set the authorized- by field in that Evidence to the trusted authority key that is at the head of the key chain that signed the CoRIM. When searching the ACS for an entry which matches a Reference Value containing an authorized-by field, the Verifier SHALL ignore ACS entries if none of the keys present in the Reference Value authorized-by field are also present in the ACS authorized-by field. The Verifier SHOULD set the authorized-by field in ACS entries to a format which contains only a key, for example the tagged-cose-key- type format. Using a common format makes it easier to compare the field. 8.4.1.2. Appraisal Claims Set augmentation using CoMID triples In the ACS augmentation phase, a CoRIM Appraisal Context and an Evidence Appraisal Policy are used by the Verifier to find CoMID triples which match the ACS. Triples that specify an ACS matching condition will augment the ACS with Endorsements if the condition is met. Each triple is processed independently of other triples. However, the ACS state may change as a result of processing a triple. If a triple condition does not match, then the Verifier continues to process other triples. Birkholz, et al. Expires 9 January 2025 [Page 55] Internet-Draft CoRIM July 2024 8.4.1.3. Ordering of triple processing Triples interface with the ACS by either adding new ACS entries or by matching existing ACS entries before updating the ACS. Most triples use an environment-map field to select the AES entries to match or modify. This field may be contained in an explicit matching condition, such as stateful-environment-record. The order of triples processing is important. Processing a triple may result in ACS modifications that affect matching behavior of other triples. The Verifier MUST ensure that a triple including a matching condition is processed after any other triple that modifies or adds an ACS entry with an environment-map that is in the matching condition. This can be acheived by sorting the triples before processing, by repeating processing of some triples after ACS modifications or by other algorithms. 8.5. Reference Values Corroboration and Augmentation (Phase 3) Reference Value Providers (RVP) publish Reference Values triples that are matched against ACS entries. Reference Values may describe multiple acceptable states for Attesters; hence "matching" determines that Evidence (contained in the ACS) satisfies an appropriate subset of the available Reference Values. If the appropriate subset matches, the authority of the RVP is added to the appropriate ACS entries. The Verifier compares each reference-triple-record against ACS entries as described in Section 8.6.1.3, where the reference-triple- record takes the place of a stateful-environment-record. If all fields of the reference-triple-record match the ACS, then the Verifier MUST add the RVP authority to each matching ACS field. If any reference-triple-record in the Reference Value triple does not match the ACS then the entire triple is ignored. 8.6. Endorsed Values Augmentation (Phase 4) // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/179 [Ned] _The following sections should describe augmentation in the context of the ev and evs relations containing ECTs staged for ACS augmentation_ Birkholz, et al. Expires 9 January 2025 [Page 56] Internet-Draft CoRIM July 2024 8.6.1. Processing triples representing Conditional Endorsements An Endorser may use CoMID tags to publish Conditional Endorsements, which are added to the ACS only if specified conditions are satisfied. This section describes the process performed by the Verifier to determine which Conditional Endorsements from the candidate CoMIDs should be added to the ACS. The verifier checks whether Conditional Endorsements are applicable by comparing ACS entries against expected values provided in stateful-environment-record object which are part of the triple. 8.6.1.1. Processing Conditional Endorsement Triple For each Conditional Endorsement Triple the Verifier compares each of the stateful-environment-record fields from the cond field in the triple against the ACS (see Section 8.6.1.3). If every stateful environment matches a corresponding ACS entry, then the Verifier MUST add an Endorsement entry to the ACS (see Section 8.10) for each endorsed-triple-record in the endorsements field. Each Endorsement from the endorsed-triple-record includes the authority which signed the Conditional Endorsement Triple. 8.6.1.2. Processing Conditional Endorsement Series Triple For each Conditional Endorsement Series Triple the Verifier iterates over the conditional-series-records within the triple, stopping if it finds a match. For each iteration, the Verifier creates a temporary stateful- environment-record by merging the stateful-environment-record in the triple with the refv field in the conditional-series-record. It compares this temporary record against the ACS (see Section 8.6.1.3). If one of the temporary records matches then the Verifier MUST add the endv Endorsement entry to the ACS. This Endorsement includes the authority which signed the Conditional Endorsement Series Triple. 8.6.1.3. Processing a stateful environment against the Appraisal Claims Set This section describes how a stateful environment is matched against an ACS entry. If any part of the processing indicates that the stateful environment does not match then the remaining steps in this section are skipped for that stateful environment. Birkholz, et al. Expires 9 January 2025 [Page 57] Internet-Draft CoRIM July 2024 The Verifier initializes a temporary "candidate entries" variable with all entries in the ACS where the stateful enviromnment environment-map is a subset of the ACS environment-map. A stateful environment environment-map is a subset of an ACS entry environment-map if each field (for example class, instance etc.) which is present in the stateful environment environment-map is also present in the ACS entry, and the CBOR encoded field values in the stateful environment and ACS entry are binary identical. If a field is not present in the stateful environment environment-map then the presence of, and value of, the corresponding ACS entry field does not affect whether the environment-maps are subsets. Before performing the binary comparison, a Verifier SHOULD convert environment-map fields into a form which meets CBOR Core Deterministic Encoding Requirements [STD94]. If the stateful environment contains an authorized-by field then the Verifier SHALL remove all candidate entries whose authorized-by field does not contain one of the keys listed in the stateful environment authorized-by field (see Section 8.4.1.1 for more details). If there are no candidate entries then the triple containing the stateful environment does not match. The stateful environment entry is compared against each of the candidate entries. For each of the candidate entries, the Verifier SHALL iterate over the codepoints which are present in the measurement-values-map field within the stateful environment measurement-map. Each of the codepoints present in the stateful environment is compared against the candidate entry. If any codepoint present in the stateful environment measurement- values-map does not match the same codepoint within the candidate entry measurement-values-map then the stateful environment does not match. If all checks above have been performed successfully then the stateful environment matches. If none of the candidate entries match the stateful environment entry then the stateful environment does not match. 8.7. Verifier Augmentation (Phase 5) 8.8. Policy Augmentation (Phase 6) Birkholz, et al. Expires 9 January 2025 [Page 58] Internet-Draft CoRIM July 2024 8.9. Attestation Results Production and Transformationn (Phase 7) 8.10. Adding to the Appraisal Claims Set 8.10.1. Appraisal Claims Set Requirements At the end of the Evidence collection process Evidence has been converted into an internal represenetation suitable for appraisal. See Section 8.2.1. Verifiers are not required to use this as their internal representation. For the purposes of this document, appraisal is described in terms of the above cited internal representation. // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/232 The ACS contains the actual state of Attester's Target Environments (TEs). The state-triples field contains Evidence (from Attesters) and Endorsements (e.g. from endorsed-triple-record). CoMID Reference Values will be matched against the ACS, as per the appraisal policy of the Verifier. This document describes an example evidence structure which can be easily matched against these Reference Values. Each entry within state-triples uses the syntax of endorsed-triple- record. When an endorsed-triple-record appears within state-triples it indicates that the authority named by measurement-map/authorized- by asserts that the actual state of one or more Claims within the Target Environment, as identified by environment-map, have the measurement values in measurement-map/mval. ECT authority is represented by cryptographic keys. Authority is asserted by digitally signing a Claim using the key. Hence, Claims are added to the ACS under the authority of a cryptographic key. Each Claim is encoded as an ECT. The environment-map and a key within measurement-values-map encode the name of the Claim. The value matching that key within measurement-values-map is the actual state of the Claim. This specification does not assign special meanings to any Claim name, it only specifies rules for determining when two Claim names are the same. Birkholz, et al. Expires 9 January 2025 [Page 59] Internet-Draft CoRIM July 2024 If two Claims have the same environment-map encoding then this does not trigger special encoding in the Verifier. The Verifier follows instructions in the CoRIM file which tell it how claims are related. If Evidence or Endorsements from different sources has the same environment-map and authorized-by then the measurement-values-maps are merged. The ACS must maintain the authority information for each ECT. There can be multiple entries in state-triples which have the same environment-map and a different authority (see Section 8.4.1.1). If the merged measurement-values-map contains duplicate codepoints and the measurement values are equivalent, then duplicate claims SHOULD be omitted. Equivalence typically means values MUST be binary identical. If the merged measurement-values-map contains duplicate codepoints and the measurement values are not equivalent then the verifier SHALL report an error and stop validation processing. 8.10.2. ACS Augmentation The ordering of ECTs in the ACS is not significant. Logically, new ECT entries are appended to the existing ACS. But implementations may optimize ECT order to achieve better performance. Additions to the ACS MUST be atomic. 8.11. ECT Comparison // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/71 This specification defines the comparison algorithm for the codepoints and CBOR tagged values described in sub-sections below. A CoRIM profile may define additional tags and their matching algorithms. Specifications that extend CoMID MUST also define comparison algorithms for the extended values. Any new codepoints requiring non-default comparison MUST add a CBOR tag to the extension that describs the desired behaviour. 8.11.1. Environment Comparison 8.11.2. Claims Comparison Birkholz, et al. Expires 9 January 2025 [Page 60] Internet-Draft CoRIM July 2024 8.11.2.1. Comparison of measurement-values-map This section describes the algorithm used to compare the measurement- values-map codepoints of an ECT with another ECT. The comparison algorithm performed depends on the value of the codepoint being compared. // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/203 If the measurement-values-map value has an associated CBOR tag. The comparison algorithm should comprehend the structure identified by the CBOR tag. If the stateful environment measurement-values-map value is tagged with a CBOR tag [STD94] then the Verifier MUST use the comparison algorithm associated with that tag. If the value is not tagged then the Verifier MUST use the comparison algorithm associated with the measurement-values-map codepoint for the entry. If the Verifier does not recognize the stateful environment CBOR tag value then the stateful environment does not match. If the stateful environment is not tagged and the measurement-values- map key is a value with handling described in the sub-sections below, then the algorithm appropriate to that key is used to match the entries. If the stateful environment is not tagged, and the measurement- values-map key is not a value described below, then the entries are compared using binary comparison of their CBOR encoded values. If the values are not binary identical then the stateful environment does not match. 8.11.2.1.1. Comparison for svn entries The value stored under measurement-values-map key 1 is an SVN, which must have type UINT. If the Reference value for measurement-values-map key 1 is an untagged UINT or a UINT tagged with #6.552 then an equality comparison is performed. If the value of the SVN in ACS is not equal to the value in the Reference Value then the Reference Value does not match. Birkholz, et al. Expires 9 January 2025 [Page 61] Internet-Draft CoRIM July 2024 If the Reference value for measurement-values-map key 1 is a UINT tagged with #6.553 then a minimum comparison is performed. If the value of the SVN in ACS less than the value in the Reference Value then the Reference Value does not match. 8.11.2.1.2. Comparison for digests entries The value stored under measurement-values-map key 2, or a value tagged with #6.TBD is a digest entry. It contains one or more digests, each measuring the same object. A Reference Value may contain multiple digests, each with a different algorithm acceptable to the Reference Value provider. If the digest in Evidence contains a single value with an algorithm and value matching one of the algorithms and values in the Reference Value then it matches. To prevent downgrade attacks, if there are multiple algorithms which are in both the Evidence and Reference Value then the digests calculated using all shared algorithms must match. If the CBOR encoding of the digests entry in the Reference Value or the ACS value with the same key is incorrect (for example if fields are missing or the wrong type) then the Reference Value does not match. The Verifier MUST iterate over the Reference Value digests array, locating hash algorithm identifiers that are present in the Reference Value and in the ACS entry. If the hash algorithm identifier which is present in the Reference Value differs from the hash algorithm identifier in the ACS entry then the Reference Value does not match. If a hash algorithm identifier is present in both the Reference Value and the ACS, but the value of the hash is not binary identical between the Reference Value and the ACS entry then the Reference Value does not match. 8.11.2.1.3. Comparison for raw-value entries [Andy] _I think this comparison method only works if the entry is at key 4 (because there needs to be a mask at key 5). Should we have a Reference Value of this which stores [expect-raw-value raw- value-mask] in an array?_ // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/71 Birkholz, et al. Expires 9 January 2025 [Page 62] Internet-Draft CoRIM July 2024 8.11.2.1.4. Comparison for cryptokeys entries The value stored under measurement-values-map key 12 is an array of $crypto-key-type-choice entries. $crypto-key-type-choice entries are CBOR tagged values. The array contains one or more entries in sequence. The CBOR tag of the first entry of the Reference Value cryptokeys array is compared with the CBOR tag of the first entry of the ACS cryptokeys value. If the CBOR tags match, then the bytes following the CBOR tag from the Reference Value entry are compared with the bytes following the CBOR tag from the ACS entry. If the byte strings match, and there is another array entry, then the next entry from the Reference Values array is likewise compared with the next entry of the ACS array. If all entries of the Reference Values array match a corresponding entry in the ACS array, then the cryptokeys Reference Value matches. Otherwise, cryptokeys does not match. 8.11.2.1.5. Comparison for Integrity Registers For each Integrity Register entry in the Reference Value, the Verifier will use the associated identifier (i.e., integrity- register-id-type-choice) to look up the matching Integrity Register entry in Evidence. If no entry is found, the Reference Value does not match. Instead, if an entry is found, the digest comparison proceeds as defined in Section 8.11.2.1.2 after equivalence has been found according to Section 5.1.4.1.6. Note that it is not required for all the entries in Evidence to be used during matching: the Reference Value could consist of a subset of the device's register space. In TPM parlance, a TPM "quote" may report all PCRs in Evidence, while a Reference Value could describe a subset of PCRs. 8.11.3. Authority Comparison The a field comparison tests for trust path termination. If the authority of the first ECT is a trust anchor for the authority of the second ECT, the second ECT is valid. If the authority values are identical, then the second ECT is valid. 8.11.4. Name Space Comparison The ns field comparison tests equality where the text values are identical. 8.11.5. Conceptual Message Type Comparison The cm field comparison tests equality of one or more bits. Birkholz, et al. Expires 9 January 2025 [Page 63] Internet-Draft CoRIM July 2024 8.11.6. Profile-directed Comparison A profile may specify handling for new CBOR tagged Reference Values. The profile must specify how to compare the CBOR tagged Reference Value against the ACS. Note that the verifier may compare Reference Values in any order, so the comparison should not be stateful. 9. Implementation Status This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RFC7942]. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalogue of available implementations or their features. Readers are advised to note that other implementations may exist. According to [RFC7942], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as Evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit". 9.1. Veraison * Organization responsible for the implementation: Veraison Project, Linux Foundation * Implementation's web page: https://github.com/veraison/corim/ README.md (https://github.com/veraison/corim/blob/main/README.md) Birkholz, et al. Expires 9 January 2025 [Page 64] Internet-Draft CoRIM July 2024 * Brief general description: The corim/corim and corim/comid packages provide a golang API for low-level manipulation of Concise Reference Integrity Manifest (CoRIM) and Concise Module Identifier (CoMID) tags respectively. The corim/cocli package uses the API above (as well as the API from the veraison/swid package) to provide a user command line interface for working with CoRIM, CoMID and CoSWID. Specifically, it allows creating, signing, verifying, displaying, uploading, and more. See https://github.com/cocli/README.md (https://github.com/veraison/corim/blob/main/cocli/README.md) for further details. * Implementation's level of maturity: alpha. * Coverage: the whole protocol is implemented, including PSA- specific extensions [I-D.fdb-rats-psa-endorsements]. * Version compatibility: Version -02 of the draft * Licensing: Apache 2.0 https://github.com/veraison/corim/blob/main/ LICENSE (https://github.com/veraison/corim/blob/main/LICENSE) * Implementation experience: n/a * Contact information: https://veraison.zulipchat.com (https://veraison.zulipchat.com) * Last updated: https://github.com/veraison/corim/commits/main (https://github.com/veraison/corim/commits/main) 10. Security and Privacy Considerations // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/11 11. IANA Considerations 11.1. New COSE Header Parameters // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/12 Birkholz, et al. Expires 9 January 2025 [Page 65] Internet-Draft CoRIM July 2024 11.2. New CBOR Tags IANA is requested to allocate the following tags in the "CBOR Tags" registry [IANA.cbor-tags], preferably with the specific CBOR tag value requested: +=======+===========+====================================+=========+ |Tag |Data Item | Semantics |Reference| +=======+===========+====================================+=========+ |500 |tag | A tagged-concise-rim-type-choice, |RFCthis | | | | see Section 4.1.2 | | +-------+-----------+------------------------------------+---------+ |501 |map | A tagged-corim-map, see |RFCthis | | | | Section 4.1 | | +-------+-----------+------------------------------------+---------+ |502 |tag | A tagged-signed-corim, see |RFCthis | | | | Section 4.2 | | +-------+-----------+------------------------------------+---------+ |503-504|any | Earmarked for CoRIM |RFCthis | +-------+-----------+------------------------------------+---------+ |505 |bytes | A tagged-concise-swid-tag, see |RFCthis | | | | Section 4.1.2 | | +-------+-----------+------------------------------------+---------+ |506 |bytes | A tagged-concise-mid-tag, see |RFCthis | | | | Section 4.1.2 | | +-------+-----------+------------------------------------+---------+ |507 |any | Earmarked for CoRIM |RFCthis | +-------+-----------+------------------------------------+---------+ |508 |bytes | A tagged-concise-bom-tag, see |RFCthis | | | | Section 4.1.2 | | +-------+-----------+------------------------------------+---------+ |509-549|any | Earmarked for CoRIM |RFCthis | +-------+-----------+------------------------------------+---------+ |550 |bytes .size| tagged-ueid-type, see Section 7.5 |RFCthis | | |33 | | | +-------+-----------+------------------------------------+---------+ |552 |uint | tagged-svn, see |RFCthis | | | | Section 5.1.4.1.4.4 | | +-------+-----------+------------------------------------+---------+ |553 |uint | tagged-min-svn, see |RFCthis | | | | Section 5.1.4.1.4.4 | | +-------+-----------+------------------------------------+---------+ |554 |text | tagged-pkix-base64-key-type, see |RFCthis | | | | Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ |555 |text | tagged-pkix-base64-cert-type, see |RFCthis | | | | Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ Birkholz, et al. Expires 9 January 2025 [Page 66] Internet-Draft CoRIM July 2024 |556 |text | tagged-pkix-base64-cert-path-type, |RFCthis | | | | see Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ |557 |[int/text, | tagged-thumbprint-type, see |RFCthis | | |bytes] | Section 7.7 | | +-------+-----------+------------------------------------+---------+ |558 |COSE_Key/ | tagged-cose-key-type, see |RFCthis | | |COSE_KeySet| Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ |559 |digest | tagged-cert-thumbprint-type, see |RFCthis | | | | Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ |560 |bytes | tagged-bytes, see Section 7.8 |RFCthis | +-------+-----------+------------------------------------+---------+ |561 |digest | tagged-cert-path-thumbprint-type, |RFCthis | | | | see Section 5.1.4.1.5 | | +-------+-----------+------------------------------------+---------+ |562-599|any | Earmarked for CoRIM |RFCthis | +-------+-----------+------------------------------------+---------+ Table 8 Tags designated as "Earmarked for CoRIM" can be reassigned by IANA based on advice from the designated expert for the CBOR Tags registry. 11.3. New CoRIM Registries // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/14 11.4. New CoMID Registries // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/15 11.5. New CoBOM Registries // Content missing. Tracked at: https://github.com/ietf-rats-wg/ draft-ietf-rats-corim/issues/45 11.6. New Media Types IANA is requested to add the following media types to the "Media Types" registry [IANA.media-types]. Birkholz, et al. Expires 9 January 2025 [Page 67] Internet-Draft CoRIM July 2024 +=====================+=====================+================+ | Name | Template | Reference | +=====================+=====================+================+ | corim-signed+cbor | application/corim- | RFCthis, | | | signed+cbor | Section 11.6.1 | +---------------------+---------------------+----------------+ | corim-unsigned+cbor | application/corim- | RFCthis, | | | unsigned+cbor | Section 11.6.2 | +---------------------+---------------------+----------------+ Table 9: New Media Types 11.6.1. corim-signed+cbor Type name: application Subtype name: corim-signed+cbor Required parameters: n/a Optional parameters: "profile" (CoRIM profile in string format. OIDs MUST use the dotted-decimal notation.) Encoding considerations: binary Security considerations: Section 10 of RFCthis Interoperability considerations: n/a Published specification: RFCthis Applications that use this media type: Attestation Verifiers, Endorsers and Reference-Value providers that need to transfer COSE Sign1 wrapped CoRIM payloads over HTTP(S), CoAP(S), and other transports. Fragment identifier considerations: n/a Magic number(s): D9 01 F6 D2, D9 01 F4 D9 01 F6 D2 File extension(s): n/a Macintosh file type code(s): n/a Person & email address to contact for further information: RATS WG mailing list (rats@ietf.org) Intended usage: COMMON Restrictions on usage: none Author/Change controller: IETF Provisional registration? Maybe 11.6.2. corim-unsigned+cbor Type name: application Subtype name: corim-unsigned+cbor Required parameters: n/a Optional parameters: "profile" (CoRIM profile in string format. OIDs MUST use the dotted-decimal notation.) Encoding considerations: binary Security considerations: Section 10 of RFCthis Interoperability considerations: n/a Birkholz, et al. Expires 9 January 2025 [Page 68] Internet-Draft CoRIM July 2024 Published specification: RFCthis Applications that use this media type: Attestation Verifiers, Endorsers and Reference-Value providers that need to transfer unprotected CoRIM payloads over HTTP(S), CoAP(S), and other transports. Fragment identifier considerations: n/a Magic number(s): D9 01 F5, D9 01 F4 D9 01 F5 File extension(s): n/a Macintosh file type code(s): n/a Person & email address to contact for further information: RATS WG mailing list (rats@ietf.org) Intended usage: COMMON Restrictions on usage: none Author/Change controller: IETF Provisional registration? Maybe 11.7. CoAP Content-Formats Registration IANA is requested to register the two following Content-Format numbers in the "CoAP Content-Formats" sub-registry, within the "Constrained RESTful Environments (CoRE) Parameters" Registry [IANA.core-parameters]: +===============================+================+======+===========+ | Content-Type | Content Coding | ID | Reference | +===============================+================+======+===========+ | application/corim- | - | TBD1 | RFCthis | | signed+cbor | | | | +-------------------------------+----------------+------+-----------+ | application/corim- | - | TBD2 | RFCthis | | unsigned+cbor | | | | +-------------------------------+----------------+------+-----------+ Table 10: New Content-Formats 12. References 12.1. Normative References [IANA.cbor-tags] IANA, "Concise Binary Object Representation (CBOR) Tags", . [IANA.core-parameters] IANA, "Constrained RESTful Environments (CoRE) Parameters", . Birkholz, et al. Expires 9 January 2025 [Page 69] Internet-Draft CoRIM July 2024 [IANA.language-subtag-registry] IANA, "Language Subtag Registry", . [IANA.media-types] IANA, "Media Types", . [IANA.named-information] IANA, "Named Information", . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally Unique IDentifier (UUID) URN Namespace", RFC 4122, DOI 10.17487/RFC4122, July 2005, . [RFC7468] Josefsson, S. and S. Leonard, "Textual Encodings of PKIX, PKCS, and CMS Structures", RFC 7468, DOI 10.17487/RFC7468, April 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8610] Birkholz, H., Vigano, C., and C. Bormann, "Concise Data Definition Language (CDDL): A Notational Convention to Express Concise Binary Object Representation (CBOR) and JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610, June 2019, . [RFC9090] Bormann, C., "Concise Binary Object Representation (CBOR) Tags for Object Identifiers", RFC 9090, DOI 10.17487/RFC9090, July 2021, . [RFC9334] Birkholz, H., Thaler, D., Richardson, M., Smith, N., and W. Pan, "Remote ATtestation procedureS (RATS) Architecture", RFC 9334, DOI 10.17487/RFC9334, January 2023, . Birkholz, et al. Expires 9 January 2025 [Page 70] Internet-Draft CoRIM July 2024 [RFC9393] Birkholz, H., Fitzgerald-McKay, J., Schmidt, C., and D. Waltermire, "Concise Software Identification Tags", RFC 9393, DOI 10.17487/RFC9393, June 2023, . [STD66] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [STD94] Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", STD 94, RFC 8949, DOI 10.17487/RFC8949, December 2020, . [STD96] Schaad, J., "CBOR Object Signing and Encryption (COSE): Structures and Process", STD 96, RFC 9052, DOI 10.17487/RFC9052, August 2022, . [X.690] International Telecommunications Union, "Information technology -- ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)", ITU-T Recommendation X.690, August 2015, . 12.2. Informative References [CE.SPDM] Trusted Computing Group, "TCG DICE Concise Evidence Binding for SPDM", Version 1.00, Revision 0.54 , January 2024, . [DICE.AA] Trusted Computing Group, "DICE Attestation Architecture", Version 1.1, Revision 0.17, public review , May 2023, . [DICE.Layer] Trusted Computing Group, "DICE Layering Architecture", Version 1.0, Revision 0.19 , July 2020, . Birkholz, et al. Expires 9 January 2025 [Page 71] Internet-Draft CoRIM July 2024 [I-D.fdb-rats-psa-endorsements] Fossati, T., Deshpande, Y., and H. Birkholz, "Arm's Platform Security Architecture (PSA) Attestation Verifier Endorsements", Work in Progress, Internet-Draft, draft- fdb-rats-psa-endorsements-04, 4 March 2024, . [I-D.ietf-rats-concise-ta-stores] Wallace, C., Housley, R., Fossati, T., and Y. Deshpande, "Concise TA Stores (CoTS)", Work in Progress, Internet- Draft, draft-ietf-rats-concise-ta-stores-02, 5 December 2023, . [I-D.ietf-rats-eat] Lundblade, L., Mandyam, G., O'Donoghue, J., and C. Wallace, "The Entity Attestation Token (EAT)", Work in Progress, Internet-Draft, draft-ietf-rats-eat-29, 8 July 2024, . [I-D.ietf-rats-endorsements] Thaler, D., Birkholz, H., and T. Fossati, "RATS Endorsements", Work in Progress, Internet-Draft, draft- ietf-rats-endorsements-01, 12 June 2024, . [I-D.tschofenig-rats-psa-token] Tschofenig, H., Frost, S., Brossard, M., Shaw, A. L., and T. Fossati, "Arm's Platform Security Architecture (PSA) Attestation Token", Work in Progress, Internet-Draft, draft-tschofenig-rats-psa-token-23, 24 June 2024, . [IANA.coswid] IANA, "Concise Software Identifier (CoSWID)", . [RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness of Running Code: The Implementation Status Section", BCP 205, RFC 7942, DOI 10.17487/RFC7942, July 2016, . Birkholz, et al. Expires 9 January 2025 [Page 72] Internet-Draft CoRIM July 2024 [SPDM] Distributed Management Task Force, "Security Protocol and Data Model (SPDM)", Version 1.3.0 , May 2023, . Appendix A. Base CoRIM CDDL corim = tagged-concise-rim-type-choice $concise-rim-type-choice /= tagged-corim-map $concise-rim-type-choice /= tagged-signed-corim concise-bom-tag = { &(tag-identity: 0) => tag-identity-map &(tags-list: 1) => [ + tag-identity-map ], &(bom-validity: 2) => validity-map * $$concise-bom-tag-extension } $concise-tag-type-choice /= tagged-concise-swid-tag $concise-tag-type-choice /= tagged-concise-mid-tag $concise-tag-type-choice /= tagged-concise-bom-tag corim-entity-map = entity-map<$corim-role-type-choice, $$corim-entity-map-extension> $corim-id-type-choice /= tstr $corim-id-type-choice /= uuid-type corim-locator-map = { &(href: 0) => uri ? &(thumbprint: 1) => digest } corim-map = { &(id: 0) => $corim-id-type-choice &(tags: 1) => [ + $concise-tag-type-choice ] ? &(dependent-rims: 2) => [ + corim-locator-map ] ? &(profile: 3) => $profile-type-choice ? &(rim-validity: 4) => validity-map ? &(entities: 5) => [ + corim-entity-map ] * $$corim-map-extension } corim-meta-map = { &(signer: 0) => corim-signer-map ? &(signature-validity: 1) => validity-map } Birkholz, et al. Expires 9 January 2025 [Page 73] Internet-Draft CoRIM July 2024 $corim-role-type-choice /= &(manifest-creator: 1) corim-signer-map = { &(signer-name: 0) => $entity-name-type-choice ? &(signer-uri: 1) => uri * $$corim-signer-map-extension } COSE-Sign1-corim = [ protected: bstr .cbor protected-corim-header-map unprotected: unprotected-corim-header-map payload: bstr .cbor tagged-corim-map signature: bstr ] $profile-type-choice /= uri $profile-type-choice /= tagged-oid-type protected-corim-header-map = { &(alg: 1) => int &(content-type: 3) => "application/corim-unsigned+cbor" &(kid: 4) => bstr &(corim-meta: 8) => bstr .cbor corim-meta-map * cose-label => cose-value } signed-corim = #6.18(COSE-Sign1-corim) tagged-corim-map = #6.501(corim-map) tagged-concise-rim-type-choice = #6.500($concise-rim-type-choice) tagged-signed-corim = #6.502(signed-corim) tagged-concise-swid-tag = #6.505(bytes .cbor concise-swid-tag) tagged-concise-mid-tag = #6.506(bytes .cbor concise-mid-tag) tagged-concise-bom-tag = #6.508(bytes .cbor concise-bom-tag) unprotected-corim-header-map = { * cose-label => cose-value } validity-map = { ? &(not-before: 0) => time &(not-after: 1) => time Birkholz, et al. Expires 9 January 2025 [Page 74] Internet-Draft CoRIM July 2024 } concise-mid-tag = { ? &(language: 0) => text &(tag-identity: 1) => tag-identity-map ? &(entities: 2) => [ + comid-entity-map ] ? &(linked-tags: 3) => [ + linked-tag-map ] &(triples: 4) => triples-map * $$concise-mid-tag-extension } accepted-claims-set = { &(state-triples: 0) => [ + endorsed-triple-record ] ? &(identity-triples: 1) => [ + identity-triple-record ] ? &(coswid-triples: 2) => [ + ev-coswid-triple-record ] * $$accepted-claims-set-extension } attest-key-triple-record = [ environment-map [ + $crypto-key-type-choice ] ] $class-id-type-choice /= tagged-oid-type $class-id-type-choice /= tagged-uuid-type $class-id-type-choice /= tagged-bytes class-map = non-empty<{ ? &(class-id: 0) => $class-id-type-choice ? &(vendor: 1) => tstr ? &(model: 2) => tstr ? &(layer: 3) => uint ? &(index: 4) => uint }> comid-entity-map = entity-map<$comid-role-type-choice, $$comid-entity-map-extension> $comid-role-type-choice /= &(tag-creator: 0) $comid-role-type-choice /= &(creator: 1) $comid-role-type-choice /= &(maintainer: 2) conditional-endorsement-series-triple-record = [ stateful-environment-record ; order matters: the first matching record wins and halts matching [ + conditional-series-record ] ] Birkholz, et al. Expires 9 January 2025 [Page 75] Internet-Draft CoRIM July 2024 conditional-series-record = [ ; reference values to be matched against evidence refv: measurement-values-map ; endorsed values that apply in case revf matches endv: measurement-values-map ] COSE_KeySet = [ + COSE_Key ] COSE_Key = { 1 => tstr / int ? 2 => bstr ? 3 => tstr / int ? 4 => [+ (tstr / int) ] ? 5 => bstr * cose-label => cose-value } cose-label = int / tstr cose-value = any coswid-triple-record = [ environment-map [ + concise-swid-tag-id ] ] concise-swid-tag-id = text / bstr .size 16 $crypto-key-type-choice /= tagged-pkix-base64-key-type $crypto-key-type-choice /= tagged-pkix-base64-cert-type $crypto-key-type-choice /= tagged-pkix-base64-cert-path-type $crypto-key-type-choice /= tagged-cose-key-type $crypto-key-type-choice /= tagged-thumbprint-type $crypto-key-type-choice /= tagged-cert-thumbprint-type $crypto-key-type-choice /= tagged-cert-path-thumbprint-type tagged-pkix-base64-key-type = #6.554(tstr) tagged-pkix-base64-cert-type = #6.555(tstr) tagged-pkix-base64-cert-path-type = #6.556(tstr) tagged-thumbprint-type = #6.557(digest) tagged-cose-key-type = #6.558(COSE_KeySet / COSE_Key) tagged-cert-thumbprint-type = #6.559(digest) tagged-cert-path-thumbprint-type = #6.561(digest) domain-dependency-triple-record = [ $domain-type-choice [ + $domain-type-choice ] ] Birkholz, et al. Expires 9 January 2025 [Page 76] Internet-Draft CoRIM July 2024 domain-membership-triple-record = [ $domain-type-choice [ + environment-map ] ] conditional-endorsement-triple-record = [ conditions: [ + stateful-environment-record ] endorsements: [ + endorsed-triple-record ] ] $domain-type-choice /= uint $domain-type-choice /= text $domain-type-choice /= tagged-uuid-type $domain-type-choice /= tagged-oid-type endorsed-triple-record = [ environment-map measurement-map ] entity-map = { &(entity-name: 0) => $entity-name-type-choice ? &(reg-id: 1) => uri &(role: 2) => [ + role-type-choice ] * extension-socket } $entity-name-type-choice /= text environment-map = non-empty<{ ? &(class: 0) => class-map ? &(instance: 1) => $instance-id-type-choice ? &(group: 2) => $group-id-type-choice }> flags-map = { ? &(is-configured: 0) => bool ? &(is-secure: 1) => bool ? &(is-recovery: 2) => bool ? &(is-debug: 3) => bool ? &(is-replay-protected: 4) => bool ? &(is-integrity-protected: 5) => bool ? &(is-runtime-meas: 6) => bool ? &(is-immutable: 7) => bool ? &(is-tcb: 8) => bool ? &(is-confidentiality-protected: 9) => bool * $$flags-map-extension } Birkholz, et al. Expires 9 January 2025 [Page 77] Internet-Draft CoRIM July 2024 $group-id-type-choice /= tagged-uuid-type $group-id-type-choice /= tagged-bytes identity-triple-record = [ environment-map [ + $crypto-key-type-choice ] ] $instance-id-type-choice /= tagged-ueid-type $instance-id-type-choice /= tagged-uuid-type $instance-id-type-choice /= $crypto-key-type-choice $instance-id-type-choice /= tagged-bytes ip-addr-type-choice = ip4-addr-type / ip6-addr-type ip4-addr-type = bytes .size 4 ip6-addr-type = bytes .size 16 linked-tag-map = { &(linked-tag-id: 0) => $tag-id-type-choice &(tag-rel: 1) => $tag-rel-type-choice } mac-addr-type-choice = eui48-addr-type / eui64-addr-type eui48-addr-type = bytes .size 6 eui64-addr-type = bytes .size 8 $measured-element-type-choice /= tagged-oid-type $measured-element-type-choice /= tagged-uuid-type $measured-element-type-choice /= uint measurement-map = { ? &(mkey: 0) => $measured-element-type-choice &(mval: 1) => measurement-values-map ? &(authorized-by: 2) => [ + $crypto-key-type-choice ] } measurement-values-map = non-empty<{ ? &(version: 0) => version-map ? &(svn: 1) => svn-type-choice ? &(digests: 2) => digests-type ? &(flags: 3) => flags-map ? ( &(raw-value: 4) => $raw-value-type-choice, ? &(raw-value-mask: 5) => raw-value-mask-type ) ? &(mac-addr: 6) => mac-addr-type-choice ? &(ip-addr: 7) => ip-addr-type-choice ? &(serial-number: 8) => text Birkholz, et al. Expires 9 January 2025 [Page 78] Internet-Draft CoRIM July 2024 ? &(ueid: 9) => ueid-type ? &(uuid: 10) => uuid-type ? &(name: 11) => text ? &(cryptokeys: 13) => [ + $crypto-key-type-choice ] ? &(integrity-registers: 14) => integrity-registers * $$measurement-values-map-extension }> non-empty = (M) .and ({ + any => any }) oid-type = bytes tagged-oid-type = #6.111(oid-type) $raw-value-type-choice /= tagged-bytes raw-value-mask-type = bytes reference-triple-record = [ environment-map measurement-map ] stateful-environment-record = [ environment-map, measurement-map ] svn-type = uint svn = svn-type min-svn = svn-type tagged-svn = #6.552(svn) tagged-min-svn = #6.553(min-svn) svn-type-choice = tagged-svn / tagged-min-svn $tag-id-type-choice /= tstr $tag-id-type-choice /= uuid-type tag-identity-map = { &(tag-id: 0) => $tag-id-type-choice ? &(tag-version: 1) => tag-version-type } $tag-rel-type-choice /= &(supplements: 0) $tag-rel-type-choice /= &(replaces: 1) tag-version-type = uint .default 0 tagged-bytes = #6.560(bytes) Birkholz, et al. Expires 9 January 2025 [Page 79] Internet-Draft CoRIM July 2024 triples-map = non-empty<{ ? &(reference-triples: 0) => [ + reference-triple-record ] ? &(endorsed-triples: 1) => [ + endorsed-triple-record ] ? &(identity-triples: 2) => [ + identity-triple-record ] ? &(attest-key-triples: 3) => [ + attest-key-triple-record ] ? &(dependency-triples: 4) => [ + domain-dependency-triple-record ] ? &(membership-triples: 5) => [ + domain-membership-triple-record ] ? &(coswid-triples: 6) => [ + coswid-triple-record ] ? &(conditional-endorsement-series-triples: 8) => [ + conditional-endorsement-series-triple-record ] ? &(conditional-endorsement-triples: 10) => [ + conditional-endorsement-triple-record ] * $$triples-map-extension }> ueid-type = bytes .size 33 tagged-ueid-type = #6.550(ueid-type) uuid-type = bytes .size 16 tagged-uuid-type = #6.37(uuid-type) version-map = { &(version: 0) => text ? &(version-scheme: 1) => $version-scheme } digest = [ alg: (int / text), val: bytes ] digests-type = [ + digest ] integrity-register-id-type-choice = uint / text integrity-registers = { + integrity-register-id-type-choice => digests-type } concise-swid-tag = { tag-id => text / bstr .size 16, Birkholz, et al. Expires 9 January 2025 [Page 80] Internet-Draft CoRIM July 2024 tag-version => integer, ? corpus => bool, ? patch => bool, ? supplemental => bool, software-name => text, ? software-version => text, ? version-scheme => $version-scheme, ? media => text, ? software-meta => one-or-more, entity => one-or-more, ? link => one-or-more, ? payload-or-evidence, * $$coswid-extension, global-attributes, } payload-or-evidence //= ( payload => payload-entry ) payload-or-evidence //= ( evidence => evidence-entry ) any-uri = uri label = text / int $version-scheme /= multipartnumeric $version-scheme /= multipartnumeric-suffix $version-scheme /= alphanumeric $version-scheme /= decimal $version-scheme /= semver $version-scheme /= int / text any-attribute = ( label => one-or-more / one-or-more ) one-or-more = T / [ 2* T ] global-attributes = ( ? lang => text, * any-attribute, ) hash-entry = [ hash-alg-id: int, hash-value: bytes, ] entity-entry = { entity-name => text, ? reg-id => any-uri, Birkholz, et al. Expires 9 January 2025 [Page 81] Internet-Draft CoRIM July 2024 role => one-or-more<$role>, ? thumbprint => hash-entry, * $$entity-extension, global-attributes, } $role /= tag-creator $role /= software-creator $role /= aggregator $role /= distributor $role /= licensor $role /= maintainer $role /= int / text link-entry = { ? artifact => text, href => any-uri, ? media => text, ? ownership => $ownership, rel => $rel, ? media-type => text, ? use => $use, * $$link-extension, global-attributes, } $ownership /= shared $ownership /= private $ownership /= abandon $ownership /= int / text $rel /= ancestor $rel /= component $rel /= feature $rel /= installationmedia $rel /= packageinstaller $rel /= parent $rel /= patches $rel /= requires $rel /= see-also $rel /= supersedes $rel /= supplemental $rel /= -256..64436 / text $use /= optional $use /= required $use /= recommended $use /= int / text Birkholz, et al. Expires 9 January 2025 [Page 82] Internet-Draft CoRIM July 2024 software-meta-entry = { ? activation-status => text, ? channel-type => text, ? colloquial-version => text, ? description => text, ? edition => text, ? entitlement-data-required => bool, ? entitlement-key => text, ? generator => text / bstr .size 16, ? persistent-id => text, ? product => text, ? product-family => text, ? revision => text, ? summary => text, ? unspsc-code => text, ? unspsc-version => text, * $$software-meta-extension, global-attributes, } path-elements-group = ( ? directory => one-or-more, ? file => one-or-more, ) resource-collection = ( path-elements-group, ? process => one-or-more, ? resource => one-or-more, * $$resource-collection-extension, ) file-entry = { filesystem-item, ? size => uint, ? file-version => text, ? hash => hash-entry, * $$file-extension, global-attributes, } directory-entry = { filesystem-item, ? path-elements => { path-elements-group }, * $$directory-extension, global-attributes, } process-entry = { Birkholz, et al. Expires 9 January 2025 [Page 83] Internet-Draft CoRIM July 2024 process-name => text, ? pid => integer, * $$process-extension, global-attributes, } resource-entry = { type => text, * $$resource-extension, global-attributes, } filesystem-item = ( ? key => bool, ? location => text, fs-name => text, ? root => text, ) payload-entry = { resource-collection, * $$payload-extension, global-attributes, } evidence-entry = { resource-collection, ? date => integer-time, ? device-id => text, ? location => text, * $$evidence-extension, global-attributes, } integer-time = #6.1(int) tag-id = 0 software-name = 1 entity = 2 evidence = 3 link = 4 software-meta = 5 payload = 6 hash = 7 corpus = 8 patch = 9 media = 10 supplemental = 11 Birkholz, et al. Expires 9 January 2025 [Page 84] Internet-Draft CoRIM July 2024 tag-version = 12 software-version = 13 version-scheme = 14 lang = 15 directory = 16 file = 17 process = 18 resource = 19 size = 20 file-version = 21 key = 22 location = 23 fs-name = 24 root = 25 path-elements = 26 process-name = 27 pid = 28 type = 29 entity-name = 31 reg-id = 32 role = 33 thumbprint = 34 date = 35 device-id = 36 artifact = 37 href = 38 ownership = 39 rel = 40 media-type = 41 use = 42 activation-status = 43 channel-type = 44 colloquial-version = 45 description = 46 edition = 47 entitlement-data-required = 48 entitlement-key = 49 generator = 50 persistent-id = 51 product = 52 product-family = 53 revision = 54 summary = 55 unspsc-code = 56 unspsc-version = 57 multipartnumeric = 1 multipartnumeric-suffix = 2 Birkholz, et al. Expires 9 January 2025 [Page 85] Internet-Draft CoRIM July 2024 alphanumeric = 3 decimal = 4 semver = 16384 tag-creator=1 software-creator=2 aggregator=3 distributor=4 licensor=5 maintainer=6 abandon=1 private=2 shared=3 ancestor=1 component=2 feature=3 installationmedia=4 packageinstaller=5 parent=6 patches=7 requires=8 see-also=9 supersedes=10 optional=1 required=2 recommended=3 # Contributors The authors would like to thank the following members for their valuable contributions to the specification. Andrew Draper Email: andrew.draper@intel.com Dionna Glaze Email: dionnaglaze@google.com Acknowledgments Carl Wallace for review and comments on this document. Contributors Birkholz, et al. Expires 9 January 2025 [Page 86] Internet-Draft CoRIM July 2024 Carsten Bormann Universität Bremen TZI Postfach 330440 D-28359 Bremen Germany Phone: +49-421-218-63921 Email: cabo@tzi.org Carsten Bormann contributed to the CDDL specifications and the IANA considerations. Authors' Addresses Henk Birkholz Fraunhofer SIT Email: henk.birkholz@ietf.contact Thomas Fossati Linaro Email: Thomas.Fossati@linaro.org Yogesh Deshpande arm Email: yogesh.deshpande@arm.com Ned Smith Intel Email: ned.smith@intel.com Wei Pan Huawei Technologies Email: william.panwei@huawei.com Birkholz, et al. Expires 9 January 2025 [Page 87]