Internet-Draft Root Zone Trust Anchor Publication July 2024
Abley, et al. Expires 9 January 2025 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-dnsop-rfc7958bis-03
Obsoletes:
7958 (if approved)
Published:
Intended Status:
Informational
Expires:
Authors:
J. Abley
Cloudflare
J. Schlyter
Kirei AB
G. Bailey
Independent
P. Hoffman
ICANN

DNSSEC Trust Anchor Publication for the Root Zone

Abstract

The root zone of the Domain Name System (DNS) is cryptographically signed using DNS Security Extensions (DNSSEC).

In order to obtain secure answers from the root zone of the DNS using DNSSEC, a client must configure a suitable trust anchor. This document describes the format and publication mechanisms IANA uses to distribute the DNSSEC trust anchors.

This document obsoletes RFC 7958.

About This Document

This note is to be removed before publishing as an RFC.

Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-dnsop-rfc7958bis/.

Source for this draft and an issue tracker can be found at https://github.com/paulehoffman/draft-bash-rfc7958bis.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 9 January 2025.

Table of Contents

1. Introduction

The Domain Name System (DNS) is described in [RFC1034] and [RFC1035]. DNS Security Extensions (DNSSEC) are described in [RFC9364].

In the DNSSEC protocol, Resource Record Sets (RRSets) are signed cryptographically. This means that a response to a query contains signatures that allow the integrity and authenticity of the RRSet to be verified. DNSSEC signatures are validated by following a chain of signatures to a "trust anchor". The reason for trusting a trust anchor is outside the DNSSEC protocol, but having one or more trust anchors is required for the DNSSEC protocol to work.

The publication of trust anchors for the root zone of the DNS is an IANA function performed by ICANN, through its affiliate Public Technical Identifiers (PTI). A detailed description of corresponding key management practices can be found in [DPS].

This document describes the formats and distribution methods of DNSSEC trust anchors that is used by IANA for the root zone of the DNS. Other organizations might have different formats and mechanisms for distributing DNSSEC trust anchors for the root zone; however, most operators and software vendors have chosen to rely on the IANA trust anchors.

The formats and distribution methods described in this document are a complement to, not a substitute for, the automated DNSSEC trust anchor update protocol described in [RFC5011]. That protocol allows for secure in-band succession of trust anchors when trust has already been established. This document describes one way to establish an initial trust anchor that can be used by RFC 5011.

This document obsoletes [RFC7958].

1.1. Definitions

The term "trust anchor" is used in many different contexts in the security community. Many of the common definitions conflict because they are specific to a specific system, such as just for DNSSEC or just for S/MIME messages.

In cryptographic systems with hierarchical structure, a trust anchor is an authoritative entity for which trust is assumed and not derived. The format of the entity differs in different systems, but the basic idea, the decision to trust this entity is made outside of the system that relies on it, is common to all the common uses of the term "trust anchor".

The root zone trust anchor formats published by IANA are defined in Section 2. [RFC4033] defines a trust anchor as "A configured DNSKEY RR or DS RR hash of a DNSKEY RR". Note that the formats defined here do not match the definition of "trust anchor" from [RFC4033]; however, a system that wants to convert the trusted material from IANA into a Delegation Signer (DS) RR can do so.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

1.2. Changes from RFC 7958

This version of the document includes the following changes:

  • There is a significant technical change from erratum 5932 <https://www.rfc-editor.org/errata/eid5932>. This is in the seventh paragraph of Section 2.2.

  • Added the optional public key element.

  • Removed the certificates and certificate signing mechanisms.

  • Removed the detached OpenPGP signature mechanism.

  • The reference to the DNSSEC Practice Statement [DPS] was updated.

  • Say explicitly that the XML documents might have XML comments in them.

  • Clarified the use of the detached CMS signature.

  • Added an IANA Considerations section.

  • Simplified the description of using the validFrom and validUntil attributes.

  • There was a bit of editorial cleanup.

2. IANA DNSSEC Root Zone Trust Anchor Format and Semantics

IANA publishes trust anchors for the root zone as an XML document that contains the hashes of the DNSKEY records and optionally the keys from the DNSKEY records.

This format and the semantics associated are described in the rest of this section.

Note that the XML document can have XML comments. For example, IANA might use these comments to add pointers to important information on the IANA web site. XML comments are only used as human-readable commentary, not extensions to the grammar.

The XML document contains a set of hashes for the DNSKEY records that can be used to validate the root zone. The hashes are consistent with the defined presentation format of a DS resource.

The XML document also can contain the keys from the DNSKEY records. The keys are consistent with the defined presentation format of a DNSKEY resource.

Note that the hashes are mandatory in the syntax, but the keys are optional.

2.1. XML Syntax

A RELAX NG Compact Schema [RELAX-NG] for the documents used to publish trust anchors is:

datatypes xsd = "http://www.w3.org/2001/XMLSchema-datatypes"

start = element TrustAnchor {
    attribute id { xsd:string },
    attribute source { xsd:string },
    element Zone { xsd:string },

    keydigest+
}

keydigest = element KeyDigest {
    attribute id { xsd:string },
    attribute validFrom { xsd:dateTime },
    attribute validUntil { xsd:dateTime }?,

    element KeyTag {
            xsd:nonNegativeInteger { maxInclusive = "65535" } },
    element Algorithm {
            xsd:nonNegativeInteger { maxInclusive = "255" } },
    element DigestType {
            xsd:nonNegativeInteger { maxInclusive = "255" } },
    element Digest { xsd:hexBinary },
    element PublicKey { xsd:base64Binary }?
}

2.2. XML Semantics

The TrustAnchor element is the container for all of the trust anchors in the file.

The id attribute in the TrustAnchor element is an opaque string that identifies the set of trust anchors. Its value has no particular semantics. Note that the id element in the TrustAnchor element is different than the id element in the KeyDigest element, described below.

The source attribute in the TrustAnchor element gives information about where to obtain the TrustAnchor container. It is likely to be a URL and is advisory only.

The Zone element in the TrustAnchor element states to which DNS zone this container applies. The root zone is indicated by a single period (.) character without any quotation marks.

The TrustAnchor element contains one or more KeyDigest elements. Each KeyDigest element represents the digest of a past, current, or potential future DNSKEY record of the zone defined in the Zone element.

The id attribute in the KeyDigest element is an opaque string that identifies the hash. Note that the id element in the KeyDigest element is different than the id element in the TrustAnchor element described above.

The validFrom and validUntil attributes in the KeyDigest element specify the range of times that the KeyDigest element can be used as a trust anchor.

Note that the validUntil attribute of the KeyDigest element is optional. If the relying party is using a trust anchor that has a KeyDigest element that does not have a validUntil attribute, it can change to a trust anchor with a KeyDigest element that does have a validUntil attribute, as long as that trust anchor's validUntil attribute is in the future and the DNSKEY elements of the KeyDigest are the same as the previous trust anchor.

Relying parties SHOULD NOT use a KeyDigest outside of the time range given in the validFrom and validUntil attributes.

The KeyTag element in the KeyDigest element contains the key tag for the DNSKEY record represented in this KeyDigest.

The Algorithm element in the KeyDigest element contains the signing algorithm identifier for the DNSKEY record represented in this KeyDigest.

The DigestType element in the KeyDigest element contains the digest algorithm identifier for the DNSKEY record represented in this KeyDigest.

The Digest element in the KeyDigest element contains the hexadecimal representation of the hash for the DNSKEY record represented in this KeyDigest.

The PublicKey element in the KeyDigest element contains the base64 representation of the public key represented in this KeyDigest. The PublicKey is optional and is new in this version of the specification. It can be useful when IANA has a trust anchor that has not yet been published in the DNS root.

2.3. Converting from XML to DS Records

The display format for the DS record that is the equivalent of a KeyDigest element can be constructed by marshaling the KeyTag, Algorithm, DigestType, and Digest elements. For example, assume that the TrustAnchor element contains:

<?xml version="1.0" encoding="UTF-8"?>
<TrustAnchor
   id="AD42165F-3B1A-4778-8F42-D34A1D41FD93"
   source="http://data.iana.org/root-anchors/root-anchors.xml">
<Zone>.</Zone>
<KeyDigest id="Kjqmt7v" validFrom="2010-07-15T00:00:00+00:00">
<KeyTag>19036</KeyTag>
<Algorithm>8</Algorithm>
<DigestType>2</DigestType>
<Digest>
49AAC11D7B6F6446702E54A1607371607A1A41855200FD2CE1CDDE32F24E8FB5
</Digest>
<PublicKey>
AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
QxA+Uk1ihz0=
</PublicKey>
</KeyDigest>
</TrustAnchor>

The DS record would be:

. IN DS 19036 8 2
   49AAC11D7B6F6446702E54A1607371607A1A41855200FD2CE1CDDE32F24E8FB5

2.4. Converting from XML to DNSKEY Records

The display format for the DNSKEY record that is the equivalent of a KeyDigest element can be constructed by marshaling the Algorithm and PublicKey elements with some constants. For example, assume that the TrustAnchor element is the same as in Section 2.3. The DNSKEY record would be:

. IN DNSKEY 257 3 8
   AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
   FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
   bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
   X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
   W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
   Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
   QxA+Uk1ihz0=

The published trust anchor does not provide values for DNSKEY protocol or flags. For the purpose of this mechanism, clients can assume valid trust anchors will be have the ZONE and SEP flag bits set to 1.

2.5. XML Example

The following describes two fictitious trust anchors for the root zone.

<?xml version="1.0" encoding="UTF-8"?>

<!-- Note that these trust anchors are fictitious. -->

<TrustAnchor
    id="AD42165F-B099-4778-8F42-D34A1D41FD93"
    source="http://data.iana.org/root-anchors/root-anchors.xml">
    <Zone>.</Zone>
    <KeyDigest id="42"
               validFrom="2010-07-01T00:00:00-00:00"
               validUntil="2010-08-01T00:00:00-00:00"> <!-- This key
    is no longer valid, since validUntil is in the past -->
        <KeyTag>34291</KeyTag>
        <Algorithm>5</Algorithm>
        <DigestType>1</DigestType>
        <Digest>c8cb3d7fe518835490af8029c23efbce6b6ef3e2</Digest>
    </KeyDigest>
    <KeyDigest id="53"
               validFrom="2010-08-01T00:00:00-00:00">
        <KeyTag>12345</KeyTag>
        <Algorithm>5</Algorithm>
        <DigestType>1</DigestType>
        <Digest>a3cf809dbdbc835716ba22bdc370d2efa50f21c7</Digest>
    </KeyDigest>
</TrustAnchor>

3. Root Zone Trust Anchor Retrieval

3.1. Retrieving Trust Anchors with HTTPS and HTTP

Trust anchors are available for retrieval using HTTPS and HTTP.

In this section, all URLs are given using the "https:" scheme. If HTTPS cannot be used, replace the "https:" scheme with "http:".

The URL for retrieving the set of hashes in the XML file described in Section 2 is <https://data.iana.org/root-anchors/root-anchors.xml>.

3.2. Accepting DNSSEC Trust Anchors

A validator operator can choose whether or not to accept the trust anchors described in this document using whatever policy they want. In order to help validator operators verify the content and origin of trust anchors they receive, IANA uses digital signatures that chain to an ICANN-controlled Certificate Authority (CA) over the trust anchor data.

It is important to note that the ICANN CA is not a DNSSEC trust anchor. Instead, it is an optional mechanism for verifying the content and origin of the XML and certificate trust anchors.

The content and origin of the XML file can be verified using a digital signature on the file. IANA provides a detached Cryptographic Message Syntax (CMS) [RFC5652] signature that chains to the ICANN CA with the XML file.
This can be useful for validator operators who have received a copy of the ICANN CA's public key in a trusted out-of-band fashion. The URL for a detached CMS signature for the XML file is <https://data.iana.org/root-anchors/root-anchors.p7s>.

Another method IANA uses to help validator operators verify the content and origin of trust anchors they receive is to use the Transport Layer Security (TLS) protocol for distributing the trust anchors. Currently, the CA used for data.iana.org is well known, that is, one that is a WebTrust-accredited CA. If a system retrieving the trust anchors trusts the CA that IANA uses for the "data.iana.org" web server, HTTPS SHOULD be used instead of HTTP in order to have assurance of data origin.

3.3. Changes in the Trust Model for Distribution

IANA used to distribute the trust anchors as a self-signed PGP message and as a self-issued certificate signing request; this was described in [RFC7958]. This document removes those methods because they relied on a trust model that mixed out-of-band trust of authentication keys with out-of-band trust of the DNSSEC root keys. Note, however, that cryptographic assurance for the contents of the trust anchor now comes from the web PKI or the IANA CA as described in Section 3.2. This cryptographic assurance is bolstered by informal comparisons made by users of the trust anchors, such as software vendors comparing the trust anchor files they are using.

4. Security Considerations

This document describes how DNSSEC trust anchors for the root zone of the DNS are published. Many DNSSEC clients will only configure IANA-issued trust anchors for the DNS root to perform validation. As a consequence, reliable publication of trust anchors is important.

This document aims to specify carefully the means by which such trust anchors are published, with the goal of making it easier for those trust anchors to be integrated into user environments.

5. IANA Considerations

Each time IANA produces a new trust anchor, it MUST publish that trust anchor using the format described in this document.

IANA MAY delay the publication of a new trust anchor for operational reasons, such as having a newly-created key in multiple facilities.

When a trust anchor that was previously published is no longer suitable for use, IANA MUST update the trust anchor document accordingly by setting a validUntil date for that trust anchor. The validUntil attribute that is added MAY be a date in the past or in the future, depending on IANA's operational choices.

More information about IANA's policies and procedures for how the cryptographic keys for the DNS root zone are managed (also known as "DNSSEC Practice Statements" or "DPSs") can be found at https://www.iana.org/dnssec/procedures.

6. References

6.1. Normative References

[RFC1034]
Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, DOI 10.17487/RFC1034, , <https://www.rfc-editor.org/rfc/rfc1034>.
[RFC1035]
Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, DOI 10.17487/RFC1035, , <https://www.rfc-editor.org/rfc/rfc1035>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC4033]
Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, DOI 10.17487/RFC4033, , <https://www.rfc-editor.org/rfc/rfc4033>.
[RFC5011]
StJohns, M., "Automated Updates of DNS Security (DNSSEC) Trust Anchors", STD 74, RFC 5011, DOI 10.17487/RFC5011, , <https://www.rfc-editor.org/rfc/rfc5011>.
[RFC5652]
Housley, R., "Cryptographic Message Syntax (CMS)", STD 70, RFC 5652, DOI 10.17487/RFC5652, , <https://www.rfc-editor.org/rfc/rfc5652>.
[RFC7958]
Abley, J., Schlyter, J., Bailey, G., and P. Hoffman, "DNSSEC Trust Anchor Publication for the Root Zone", RFC 7958, DOI 10.17487/RFC7958, , <https://www.rfc-editor.org/rfc/rfc7958>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC9364]
Hoffman, P., "DNS Security Extensions (DNSSEC)", BCP 237, RFC 9364, DOI 10.17487/RFC9364, , <https://www.rfc-editor.org/rfc/rfc9364>.

6.2. Informative References

[DPS]
Root Zone KSK Operator Policy Management Authority, "DNSSEC Practice Statement for the Root Zone KSK Operator", , <https://www.iana.org/dnssec/procedures>.
[RELAX-NG]
Clark, J., "RELAX NG Compact Syntax", , <https://www.oasis-open.org/committees/relax-ng/compact-20021121.html>.

Appendix A. Historical Note

The first KSK for use in the root zone of the DNS was generated at a key ceremony at the ICANN Key Management Facility (KMF) in Culpeper, Virginia, USA on 2010-06-16. This key entered production during a second key ceremony held at an ICANN KMF in El Segundo, California, USA on 2010-07-12. The resulting trust anchor was first published on 2010-07-15.

The second KSK for use in the root zone of the DNS was generated at key ceremony #27 at the ICANN KMF in Culpeper, Virginia, USA on 2016-10-27. This key entered production during key ceremony #28 held at the ICANN KMF in El Segundo, California, USA on 2017-02-02. The resulting trust anchor was first published on 2018-11-11.

More information about the key ceremonies, including full records of previous ceremonies and plans for future ceremonies, can be found at <https://www.iana.org/dnssec/ceremonies>.

Appendix B. Acknowledgemwents

Many pioneers paved the way for the deployment of DNSSEC in the root zone of the DNS, and the authors hereby acknowledge their substantial collective contribution.

RFC 7958 incorporated suggestions made by Alfred Hoenes and Russ Housley, whose contributions are appreciated.

Authors' Addresses

Joe Abley
Cloudflare
Amsterdam
Netherlands
Jakob Schlyter
Kirei AB
Guillaume Bailey
Independent
Paul Hoffman
ICANN