SYNOPSIS

     use IO::Async::Loop;
     use Net::Async::Ping;
    
     my $p = Net::Async::Ping->new;
     my $loop = IO::Async::Loop->new;
    
     my $future = $p->ping($loop, 'myrealbox.com');
    
     $future->on_done(sub {
        say "good job the host is running!"
     });
     $future->on_fail(sub {
        say "the host is down!!!";
     });

DESCRIPTION

    This module's goal is to eventually be able to test remote hosts on a
    network with a number of different socket types and protocols.
    Currently it only supports TCP, but UDP, ICMP, and Syn are planned. If
    you need one of those feel free to work up a patch.

    This module was originally forked off of Net::Ping, so it shares some
    of it's interface, but only where it makes sense.

     my $p = Net::Async::Ping->new(
       $proto, $def_timeout, $bytes, $device, $tos, $ttl,
     );

    All arguments to new are optional, but if you want to provide one in
    the middle you must provide all the ones to the left of it. The default
    (and currently only) protocol is tcp. The default timeout is 5 seconds.
    bytes does not apply to tcp. device is what host to bind the socket to,
    ie what to ping from. Neither tos nor ttl apply to tcp currently.

    Alternately, you can use a new constructor:

     my $p = Net::Async::Ping->new(
       tcp => {
          default_timeout => 10,
          bind            => '192.168.1.1',
          port_number     => 80,
          service_check   => 1,
       },
     );

    All of the above arguments are optional. Service check, which is off by
    default, will cause ping to fail if the host refuses connection to the
    selected port (7 by default.) Bind is the same as device from before.
    =method ping

     my $future = $p->ping($loop, $host, $timeout);

    Returns a Future representing the ping. loop should be an
    IO::Async::Loop, host is the host, and timeout is optional and defaults
    to the default set above.

    The future will always terminate with the hi resolution time it took to
    check for liveness. The success or failure is checked by introspecting
    the future itself.

POD ERRORS

    Hey! The above document had some coding errors, which are explained
    below:

    Around line 27:

      Unknown directive: =method

